Easy to Operate and User-Friendly Automatic Spring Loading Machine for Oil Seal

Automatic Spring Loading  Machine for oil seal.

This machine is used for loading spring on the oil seal automatically, it can load spring on one side of the oil seal, it can also load springs on both sides of the oil seal. At the same time this machine has the function of quantitative filling of grease, and this machine has the function of  detecting unqualified product ,if one oil seal, the spring is not loaded  or not loaded properly,it will be detected and screened out.

Application scope  for the oil seal:

outer diameter of oil seal: 12~50mm

thickness of oil seal:≤20mm

Production capacity: 14~16 PCS/min

Control system: PLC+ touch screen control

Operation status display mode: touch screen, display alarm/required parameter setting and monitoring.

Operation mode: touch screen preset and adjust operating parameters; mechanical knob, single action control button, with manual / automatic working mode to select debugging function.

Power supply: single phase,220V/50HZ (sepcial voltage can be customized.)

Pressusre of compressed air supply: 0.4~0.6  Mpa

Height of working table above ground: 800±50mm, the height of the base can be adjusted, and the anti-vibration foot with self-aligning screw can be adjusted within ±50 mm.

Power: 350W

Dimension: L2200xW1200xH1800mm

Weight:250 Kgs