MDF Acoustic Micro perforted Wood Panels Ceiling and Wall

Description:

WINEGO Micro Perforated Wooden Timber Sound Absorption Acoustic Panels are engineered for superior sound absorption, perfect for medium to low frequencies. 

Feature: 

Micro perforated wood acoustic panels according to the principle of acoustics, through a variety of materials with reasonable cooperation, showing excellent noise reduction and sound absorption performance, especially for the low and middle frequency sound has a very good absorption effect. This is particularly important in the space environment, which can effectively reduce noise interference and enhance the comfort of staying.

Micro perforated wood acoustic panels also have the characteristics of environmental protection and safety, the use of natural wood production, non-toxic and tasteless, and at the same time has a good durability, and can maintain its performance and beauty for a long time.

All the features make micro perforated wood acoustic panels an effective choice for enhancing a quiet indoor environment, whether it's a public space, school or other living space, by absorbing noise and providing a more peaceful and comfortable meeting enviroment and recreation environment.

Installation options
Our micro-perforated acoustic panels can be manufactured in several versions, to be installed both on walls or on ceilings. In both cases you should leave behind a space as rear cavity filled with the low density fibre glass wool panel to help improve the optimal absorption coefficient.

Specificatins:

Application:

Multi-functional hall
Conference room
Lectural hall
Opera house
Concert hall
Home theater

Install method:

WALL INSTALLATION
Method :Wood battens installation system
Step 1:Fix the wood battens to level the wall(spacing at 400-600mm).
Step 2:Fill in fiberglass acoustic wool between wood battens.
Step 3:Fix the perforated acoustic panel on the wood battens with gun nails,and insert the wooden slat into the side groove.
Step 4:Repeat until the installation is completed, the joints between the panels are generally recommended to be 3-5mm, and the nailing position is on the side of the panel.
Step 5:Installation completion effect.