Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

• Torque and flux can be changed very fast by changing the references
• High efficiency & low losses - switching losses are minimized because the transistors are switched only when needed
• The step response has no overshoot
• No dynamic coordinate transforms are needed
• No separate modulator is needed
• There are no PI current controllers - no tuning required
• The switching frequency of the transistors is not constant but can be controlled
• Due to hysteresis control, the switching process is random by nature, resulting in low audible noise
• DC circuit's voltage variation is automatically accounted for in the algorithm
• Synchronization to rotating machine is straightforward

Inverter motor type must be a three phase AC induction motor. Preferably, you should use an inverter-grade motor that has 800V insulation for 200V class inverters, or 1600V insulation for 400V class inverters. For motor size, in practice it is much better to find the right size motor for your application; then look for an inverter to match the motor.

The EPRI Power Industry Study by General Electric in 1985 offered the following causes based on 6,000 utility motor failures: 41% were bearing related, 37% were stator related, 10% were rotor related and 12% were other causes.

The EPRI Power Industry Study by General Electric in 1985 offered the following causes based on 6,000 utility motor failures: 41% were bearing related, 37% were stator related, 10% were rotor related and 12% were other causes.