1T Reverse Osmosis Industrial Commercial Water Treatment Machine Single-Pole Three-Tank Water Purification Treatmen

Production Description

Pretreatment three-tank process flow:
Raw water tank-raw water pump-quartz sand filter-activated carbon filter-resin softener-security filter-high pressure pump-RO reverse osmosis system-pure water tank

Parameter Table

Key advantages

The equipment does not need to use a large number of chemical agents and acid and alkali regeneration treatment, so there is no discharge of chemical waste liquid and no environmental pollution.The equipment uses a fully automatic pretreatment system, which can realize unmanned operation.The equipment is equipped with on-line water quality monitoring and control to monitor water quality changes in real time and ensure water quality safety.

Maintance

Shutdown protection of reverse osmosis device
Short-term protection is applicable to the system that has been shut down for less than 15 days, and the method of low-pressure flushing every 1 ~ 3 days can be used to protect the reverse osmosis device.In practice, it is found that when the water temperature is above 20 ℃, the water in the reverse osmosis device will stink and deteriorate after 3 days of storage, and a large number of bacteria will multiply.Therefore, when the water temperature is higher than 20 ℃, it is recommended to wash at low pressure once every 2 days or 1 day; when the water temperature is lower than 20 ℃, it is recommended to wash at low pressure once every 3 days. After each washing, all inlet and outlet valves on the reverse osmosis device of the water purification equipment shall be closed.

Product Display