Industrial Treatment RO System Filter Purification Plant Machine 500L Reverse Osmosis 10 tons

 Product Description

Reverse osmosis is a new modern technology for pure water treatment. Through the reverse osmosis element to improve the purity of water, remove the impurities and salt contained in the water. Through the reverse osmosis membrane membrane on both sides of the pressure is different, through the pressure of raw water through the reverse osmosis membrane, the salt concentration of low will be to the concentration of salt direction of penetration, can be achieved in the balance state, is the osmotic pressure of the liquid. When the pressure on one side of the salt water contained for the other side of the osmotic pressure, the flow will occur in the opposite direction, the reverse osmosis process.

Parameter Table

  Working Principle

1, reverse osmosis system design software;

2, raw water quality: raw water quality to meet the water quality standards for drinking water;

3, user requirements: water production ≥ 10m3 / h (25 ℃) water quality to meet the water quality standards for drinking water. 

4, control equipment, measuring instruments and electrical equipment design, manufacturing in line with relevant regulations and standards.10 tons of reverse osmosis water treatment equipment process:

 Maintenance

In reverse osmosis equipment (shèbèi) device (device) occurs when the high and low pressure alarm, you should first check the security filter (role: filtering impurities, etc.) to the high-pressure pump between the manual valve opening is too small, and then check the RO thick discharge valve and water inlet valve (using materials: cast iron, cast steel, stainless steel, etc.) is normal, and finally press the high and low pressure alarm reset button, restart the device. Ultrapure water purifier" water purifier is the use of pretreatment, reverse osmosis technology, ultra-purification treatment and post-treatment methods, the conductive medium in the water is almost completely removed, but also the water is not dissociated colloidal substances, gases and organic matter are removed to a very low degree of water treatment equipment. Ultrapure water meter TKA Measurement method: Accurate water distribution: from 0.01-99.9 liters, fully automatic volume precision control. Conductivity Measurement:Two high precision conductivity measurement cells, independently measure cell constants, every value measured is stored in the system, automatically calibrated and controlled, superior to every previous measurement method. Temperature measurement: Platinum chip sensor with an accuracy of +/- 0.1° C. Temperature compensation can be switched off, and the results are in accordance with the requirements of the United States Pharmacopoeia (USP) for optimal measurement reliability. On-line TOC measurement: Real-time on-line TOC monitoring for continuous and accurate measurement of the organic carbon content of the water in the range 1 - 99 ppb. 

Product  Display