Die Molded Exothermic Graphite Thermal Welding Moulds for Exceptional Performance

Operation Instruction

l. Check to ensure the graphite mold and conductor is clean ,no residue before making the connection 2. Use a propane torch to dry wire conductors and remove remaining cleaning residue, solvent, or water before making the connection. 3.Close the graphite mold lid before ignition ,and close the lid tightly 4. Insert the conductors and position them for the connection.Ensure them in the center of cavity. 5. Keep the irrelevant personnel 1.5M away when welding， Keep the inflammable goods 1-2M away when welding 6.The operator must be equipped thermal barrier glove， Don’t face to the mould opening when welding 7.The operator keep 1.5M away mould is must after ignition， Don’t touch the mould and connected parts directly after welding 8.Open the mould and take the joint out with wrench 10-20S later after reaction . Insulate the joint after the conductor cooling completely .