Outdoor Aluminium UAS FPV Radio Anti Drone Jammer Fixed Type
This high power Waterproof ANTI-DRONE JAMMER is elaborately designed as a domestic and international drone-controlling device by adopting advanced technologies both at home and abroad. It is an environment-friendly jammer. And designed to disturb low-altitude flying drone's remote control signals without influence on surrounding signals such as those for mobile communication, communication base station, car remote control and so on. The jammer is configured with 7 output channels (VHF/UHF/remote control /Wifi2.4G/5.8G/GPS positioning) to intercept drone's remote control signal, disturbing range can be up to 1km for option.

Working Frequencies: 8-Frequencies
Total Output Power: 400W
Jam Range: 100-1500meters
Power Supply: AC 220V
Product Size: 700*550*300mm(LxWxD)
Product Weight: appr.30kg
| Channel | Working Frequency (±10MHZ) | Channel Power(±3dBm) | |
| CH1 | 410-490 MHz | 50W/47dBm | |
| CH2 | 840-890 MHz | 50W/47dBm | |
| CH3 | 880-930 MHz | 50W/47dBm | |
| CH4 | 1070-1190 MHz | 50W/47dBm | |
| CH5 | 1270-1330MHz | 50W/47dBm | |
| CH6 | 1420-1460 MHz | 50W/47dBm | |
| CH7 | 1880-2000MHz | 50W/47dBm | |
| CH8 | 5550-5750MHZ | 40W/46dBm | |
| Total Working Channels | 8 channels | ||
| Total Working Output | 390W | ||
| Shielding distance | 1-3km | ||
| Jamming Objects | UAV image transmission, flight control link, navigation signal | ||
| Power Supply | AC: 110-240V | ||
| Built-in internal Antenna | High gain 360℃ Omni antenna | ||
| Power consumption | 1200W | ||
| Waterproof Level | IP65 | ||
| Weight | 40Kg | ||
| Size(Length × width × height) |
700*550*300mm(LxWxD) no included antennas |
||
| Humidity | 5%-95% | ||
| Operation temperature | -20 to +50℃ | ||
Features and Advantages
- Ultrahigh frequency board-band jamming technology
- Wide coverage of 8 Frequencies with high effective power.
- Waterproof designed
- Long jamming Range up to 1km.
- High Power and Friendly use
- Support high gain Omni Antennas and Directional Panel Antennas
- Effective segmentation to block each drone controlled signals.
- Imported chips, slow start circuit design can avoid the sparking phenomenon caused by mechanical switch, high integration and stable operation. standing wave and other fault alarms, the drone signal jammer will automatically cut off the failed module to avoid damage to the drone shield.


Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.