Continuous Reforming Carrier CCR Alumina Carrier SCR-B 1/8 Inch
Product description:
SCR - B carrier has high hydrothermal stability, high stack ratio and high strength, which is suitable for continuous reforming Pt-based catalyst carrier.
Product technical indicators:
| item | unit | SCR-B target |
| Al2O3 | m% | ＞98% |
| BET surface | ㎡/g | 190±10 |
| Pile ratio | g/ml | 0.66±0.02 |
| Crushing strength | N/Each capsule | ≥40 |
| Wear rate | % | ＜4 |
| Particle size distribution | Φ1.6～1.8mm | ＞98% |
| Defect rate | m% | ＜0.5% |
| Sn/ Al2O3 | m% | 0.31±0.03 |
| Si/ Al2O3 | ppm | ＜200 |
| Fe/ Al2O3 | ppm | ＜200 |
| Na/ Al2O3 | ppm | ＜70 |
② SCR - B support is suitable for manufacturing all continuous reforming catalysts.
Product packaging
I. The special iron barrel is sealed and packed, and the inner layer is made of moisture-proof plastic bags, with a net weight of 100kg/barrel;
2. Packed in half-ton bags, lined with moisture-proof material bags, net weight 500 kg/bag.
Precautions for storage, transportation and use
I. Pay attention to waterproof and moisture-proof, and prohibit contact with other chemicals and hydrocarbon substances;
II. Do not drop or roll the iron bucket during handling;
III. When the product is used, the water absorption should be tested correctly to avoid rapid moisture absorption in wet weather affecting the impregnation load.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.