WECHANGE 1μm 10" Polypropylene Beer Filter Cartridge with 0.68m² Area and 80℃ Temperature Rating
WECHANGE 1μm 10" polypropylene beer filter cartridges are high-efficiency depth filters constructed entirely of chemically resistant polypropylene. These premium quality filters deliver consistent filtration efficiency, superior flow rates, substantial dirt holding capacity, and exceptionally long service life.
- Beer, wine, mineral water, soft drinks and beverage filtration
- Pharmaceutical and biological product process liquids
- Cosmetics and personal care product liquids
- Microelectronic chemicals, solvents, UPW and CMP slurries
- Water purification systems
- Chemical process filtration
- Absolute liquid ratings from 1μm to 10μm
- Self-bonded, non-fiber-releasing filter media
- All-polypropylene construction for chemical resistance
- High flow rates and dirt holding capacity
- Wide chemical compatibility
- 100,000-level clean room manufactured
- 100% integrity tested before delivery
| Parameter | Specification |
|---|---|
| Outer Diameter | 2.7"/69mm |
| Length | 10"/254mm, 20"/508mm, 30"/762mm, 40"/1016mm, 60"/1524mm |
| Pore Size | 1, 3, 5, 7, 10μm |
| Max. Operation Temperature | 80℃ |
| Max. Operation Pressure | Forward direction: 0.58 MPa (25±2℃), 0.24MPa (80±2℃) |
| Food Contact Compliance | GB 4806.7-2016 |
| Filtration Areas | 5"≥0.34m²; 10"≥0.68m²; 20"≥1.36m²; 30"≥2.04m²; 40"≥2.72m² |
| Sterilization Cycles | 30 times (121.4℃, 30 min offline high-pressure steam sterilization) |
| Bacterial Retention | Minimum retention rate 107 CFU/cm² (tested against Serratia marcescens) |
| Component | Material |
|---|---|
| Filter Media | Polypropylene |
| Deflector Layer | Polypropylene |
| Enclosures/Ports | High Temperature Resistance Polypropylene |
| Adapter | Polypropylene |
| Seals | Silicone/EPDM |
This standardized naming convention identifies: Trademark (WECHANFIB), Form (PLEATED), Filtration Materials (PP), Accuracy (0100=1μm), Length (10=10"), Adapter Type, and O-ring Material.
WECHANGE offers comprehensive pleated filter cartridge options with pore sizes from 1μm to 10μm, lengths from 5" to 40", and customizable connector and seal ring combinations to meet specific application requirements.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.