100kg/Batch Incinerator for Dead Animals /Medical Waste/Life Garbage
1.product introduction :
Waste incinerator is a harmless treatment equipment commonly used in the harmless treatment of medical and domestic wastes and animals.
The principle is to use the combustion of coal, fuel oil, gas and other fuels to burn and carbonize the objects to be treated at high temperature, so as to achieve the purpose of disinfection treatment.
2. Technical parameters of incinerator:
| 1. Calorific value of incinerator: the mixed calorific value is less than 4500kcal / kg | |||||||||
| 2. Equipment handling capacity: 500kg / h | |||||||||
| 3. Ignition mode: automatic ignition | |||||||||
| 4. Auxiliary fuel: diesel (low calorific value 10495kcal / kg) | |||||||||
| 5. Incinerator structure: direct combustion furnace | |||||||||
| 6. Temperature of primary combustion chamber: ≥ 800 ºC | |||||||||
| 7. Temperature of secondary combustion chamber: ≥ 1100 ºC | |||||||||
8. Flue gas outlet temperature of primary combustion chamber ≥ 850 ºC | |||||||||
| 9. Incinerator body surface temperature ≤ 35 ºC | |||||||||
10. Oxygen content of outlet flue gas (dry flue gas): 6% - 10% | |||||||||
| 11. Pressure in the furnace: negative pressure design, no counter fire, and - 3 ~ - 10mmh2o column | |||||||||
| 12. Burning rate of incineration residue gt; 5% | |||||||||
| 13. The furnace body is well sealed, and the feed furnace door adopts sealing structure to avoid gas leakage. |
3.Equipment composition :
burning main chamber ,cavity adopts high temperature refractory materials such as refractory cement .
The temperature reaches350degrees celsius to melt,the temperature reaches 750degrees celsius completely burning
it is controlled by frequency converter regulator to realize open
circuit and open circuit through high and low frequency, protect the
circuit and realize one key operation
in order to fully mix the flue gas with the secondary air supply, the secondary combustion chamber adopts a high secondary wind speed, which is arranged downward at different heights.
The secondary air forms an imaginary circle in the center of the secondary combustion chamber, the flue gas rises spirally driven by the secondary air, and the flue gas flow stroke is lengthened, so that the furnace space of the secondary combustion chamber is fully utilized, The residence time of flue gas in the secondary combustion chamber is prolonged, and the residence time of flue gas is 3.5s, so that the harmful substances in the flue gas are completely decomposed
An exhaust gas buffer device, a quench tower and an induced draft fan, and the induced draft fan, the exhaust gas buffer device and the quench tower are successively connected through a connecting pipe string;
The waste gas buffer device ensures that the incineration waste gas is provided to the quench tower for treatment slowly and uniformly, and then the waste gas is quenched through the quench tower, which can effectively treat the waste gas generated after high-temperature incineration, and solve the problems of environmental pollution, energy conservation and environmental protection.
A dust removal device that uses the centrifugal force generated by the rotating air flow to separate dust particles from the combined dust air flow
(Water film dust removal. Deacidification unit. Activated carbon plant. Nitrate lime injection device. photocatalysis. Bag filter)
guide clean air to the chimney
clean tail gas discharge device
4.Tail gas reference standard:
The pollution control standard for hazardous waste incineration (GB18484-2001) of the State Environmental Protection Administration was implemented on January 1, 2001. The allowable concentration of pollutants discharged from flue gas is as follows:
| number | contaminants | Maximum allowable emission concentration limit under different incinerator capacity(mg/m3) ≤300(Kg/h) 300~2500(Kg/h ≥2500(Kg/h) | |
| 1 | Smoke blackness | Ringerman level1 | |
| 2 | Smoke | 100 80 65 | |
| 3 | Carbon monoxide | 100 80 80 | |
| 4 | Sulfur dioxide | 400 300 200 | |
| 5 | Hydrogen fluoride | 9.0 7.0 5.0 | |
| 6 | Hydrogen chloride | 100 70 60 | |
| 7 | Nitrogen oxide | 0.1 | |
| 8 | Mercury and its compounds | 500 | |
| 9 | Cadmium and its compounds | 0.1 | |
| 10 | Arsenic nickel and their compounds | 1.0 | |
| 11 | Lead and its compounds | 1.0 | |
| 12 | Chromium,tin,antimony,copper,manganese,and their compounds | 4.0 | |
| 13 | Dioxins | 0.5TEQ ng/m3 |
Serial number | Specification and model | Main equipment size | Processing capacity (kg/batch) | incinerator volume (m2) | Power consumption (kw/h) | oil wear (l/h) | Equipment weighing (t) | |
| 1 | AEHA-25 | 1000*900*1700 | 25 | 2.5 | 2 | 3 | 1.15 | |
| 2 | AEHA-20-40 | 1200*1300*1800 | 20-40 | 3.0 | 2-4 | 3-8 | 2.2-5.5 | |
| 3 | AEHA-20-60 | 1700*1500*2100 | 20-60 | 5.0 | 2-5 | 3-10 | 4.5-7.8 | |
| 4 | AEHA-50-120 | 2200*2000*2500 | 50-120 | 10.0 | 3-12 | 4-15 | 5.0-11.5 | |
| 5 | AEHA-100-300 | 3000*3500*2900 | 100-300 | 13.0 | 10-30 | 10-40 | 15-25 | |
| 6 | AEHA-400-500 | 3000*3700*3200 | 400-500 | 17.0 | 40-50 | 50-60 | 30-45 |
5.Our transportation:
6.Our factory:
harmless incinerator technology, organizing technical public relations, sublating the advantages and disadvantages of similar equipment at home
and abroad. The equipment has the characteristics of small volume, incineration, reasonable process, technology and high degree of
harmlessness. It is an ideal waste treatment equipment for all kinds of hospitals, hotels, stations, sanitation stations, laboratories and farms.
AOERHENG company covers an area of 20000 square meters. The company adopts modern enterprise management concept. seiko manufacturing. forge ahead. the product quality is superior to the domestic and foreign counterparts products.
Company technical force is abundant. the craft is advanced. complete range of articles. in strict accordance with ISO9001 standards. organization.design. production.sales and management.
Company sets scientific research and development. engineering design. installation. debugging. production services for the integration of domestic comprehensive backbone enterprises.
Products with free-pollution disposal equipment. garbage disposal equipment. high concentration wastewater treatment equipment. organic fertilizer production equipment. air treatment equipment.
Sludge treatment equipment. automobile processing equipment such as environmental protection equipment . And can design according to customer demand.
Customization of all kinds of efficient and practical equipment and production line.
7.Our services:
pre-sale
2. Design and manufacture products according to the special requirements of customers.
3. The manufacturer shall send engineers and technicians to inspect the site free of charge.
sale
1. Product acceptance.
2. Assist the customer to formulate the construction scheme.
after-sales
1. Free guidance on equipment installation and commissioning
2. Train technical personnel for customers
3. On site training for operators
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.