Air Cooled Modular Chiller 35 2240 kW Modular Design Demand Matched Efficiency T3 55C Low GWP Ready
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
OEM;MIDEA
Product Description
Air Cooled Modular Chiller 35-2240 kW
Modular Design with Demand-Matched Efficiency, T3 55°C Climate Class, Low GWP Ready
Energy Consumption That Tracks Occupancy
Traditional oversized HVAC systems running at minimum load waste 20-30% more energy per ton of cooling. Our modular chiller eliminates this structural inefficiency by scaling capacity in direct proportion to actual building demand.
Each module operates independently at its optimum efficiency point. At partial loads, fewer modules run at or near full capacity where efficiency is highest, unlike single large chillers that suffer dramatic efficiency drops at low loads.
Key Features
Right-Sized Energy Consumption
Install only the modules needed for current load, adding capacity as building occupancy grows. Each module operates in the 75-100% load range where IEER ratings are most favorable.
- Capacity matches actual load – No oversized baseline energy consumption
- Each module runs near peak efficiency – 75-100% load sweet spot
- Eliminates chronic part-load waste – No single large chiller cycling at low capacity
- Scalable energy baseline – Consumption grows proportionally with occupancy
- Accurate energy benchmarking – Compare like-for-like across portfolio properties
- Lower Scope 2 emissions from day one – No unnecessary fossil fuel consumption
Low-GWP Refrigerant Options
Multiple refrigerant options to match regulatory environment and ESG targets with compliance through 2030 and beyond.
- R290 (GWP 3) – Lowest-GWP commercial chiller option available
- R452A (GWP 139) – 93% reduction vs. R410A, F-Gas compliant
- R513A (GWP 631) – 56% reduction vs. R134a, drop-in compatible
- Regulatory compliance mapped – Options for EU, US, Middle East, Asia
- Future-proof procurement – Low-GWP options available now
- ESG disclosure ready – Quantifiable GWP data for sustainability reports
T3 55°C Climate Performance
Full rated capacity at 55°C ambient ensures consistent performance across all climate zones without derating.
- Consistent energy performance globally – No climate-dependent derating
- Accurate carbon modeling – Nameplate efficiency equals delivered efficiency
- Portfolio benchmarking simplified – Same baseline across all properties
- No hidden energy penalties – What you spec is what you measure
- Reliable in extreme heat events – Efficiency maintained when cooling is most needed
- Simplified reporting – One efficiency standard for all portfolio properties
BMS Integration for Energy Monitoring
Native Modbus and BACnet connectivity enables seamless integration with building energy management systems.
- Per-module energy metering – Granular consumption visibility
- Standard protocols – Modbus and BACnet integrate with any BEMS
- ISO 50001 audit-ready data – Verified energy consumption records
- GHG Protocol Scope 2 ready – Electricity data for carbon calculations
- ESG disclosure support – Data feeds into GRI, CDP, TCFD reporting
- Performance gap detection – Identify underperforming units early
Oil-Free Operation Options
R290 and R452A systems use scroll compressors with minimal oil charge and oil-free design features for sensitive environments.
- Minimal oil charge – Reduced environmental liability
- No oil disposal requirements – Lower waste management costs
- Cleaner heat exchange – No oil film degradation on coils
- Sustained rated efficiency – No oil-fouling efficiency degradation
- Simpler environmental reporting – Less hazardous waste to track
- Lower lifecycle environmental impact – Reduced oil consumption over 20+ years
20+ Year Design Life
Long operational horizon maximizes carbon payback and maintains consistent performance throughout the lifecycle.
- 20+ year service life – Maximizes embodied carbon amortization
- Sustained efficiency over lifecycle – No progressive efficiency degradation
- Module-level replacement – No full-system disposal when one unit ages
- Predictable lifecycle emissions – Accurate 20-year carbon projections
- Lower lifecycle carbon intensity – Efficient operation compounds over decades
- Circular economy alignment – Individual modules recyclable, system continues
Technical Specifications
| Parameter | Value |
|---|---|
| Cooling Capacity | 35-2,240 kW (single circuit) |
| Heating Capacity | Available (heat pump models) |
| Refrigerant Options | R410A (GWP 2,088) / R452A (GWP 139) / R290 (GWP 3) / R134a (GWP 1,430) / R513A (GWP 631) |
| Platform Options | Midea Series / Climaveneta Series / A.W.S. Series |
| Climate Class | T3 – Full capacity at 55°C ambient |
| Voltage | 200-440V, 50/60Hz |
| Certifications | CE, Eurovent, AHRI 550/590 |
| BMS Protocols | Modbus RTU, Modbus TCP/IP, BACnet IP |
| Installation | Rooftop outdoor |
| Warranty | 5 years |
Ideal Applications
Green-certified buildings
Portfolio energy optimization
Regulated markets
Net-zero carbon targets
Hospital and healthcare
Educational campuses
Mixed-use developments
Data centers
Government buildings
ESG-focused portfolios
Certifications & Standards
CE Certification
Eurovent Certification
AHRI 550/590
ISO 9001/14001/45001
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Henan Hongtai HVAC Equipment Co., Ltd.
Location
NO. 1406, 14TH FLOOR, BUILDING 3, NO. 50, CHUANGFU XINCHENG, JINGGUANG ROAD STREET, ERQI DISTRICT, ZHENGZHOU CITY, HENAN PROVINCE, CHINA
Contact Person
LISA