BS3262 EN1871 Thermoplastic Road Marking Paint Anti-slip Good Reflecitve Anti Slip
BS3262 EN1871 Thermoplastic Road Marking Paint Anti-slip Good Reflecitve Anti Slip
Description
Thermoplastic road marking paint consists of resin, EVA, PE wax, fillers materials, glass bead, which is solid powder condition at normal temperature, If is is heated to 180-200 degrees by heat fusing pot under construction, it will appears flowage, coating pot under construction, it will appears flowage, coating the paint to the road surface will form hard film,It has full line type,strong wearing resistance and other flowage, Sprinkling reflecting glass micro beads on the surface under construction, it has good reflecting effect at night , it is widely applied in highway and road. According to the environment used and the different construction requirements,we can supply different types of paint for our customer option.
Technical Specification
|
Density(g/cm3) |
1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
Features of Hot Melt Paint:
1. Excellent anti-crack performance
2. Good leveling
3. Excellent reflective performance
4. Stain-resistant
5. Great wear-resisting
6. Eco-Friendly
Formula Customized
| Customized Formula | ||
| Customized Formula | Content(Customized range) | Characteristics |
| C5 Resin | 10%-22% | Fluidity Toughness Hardness Adhesion |
| Titanium Dioxide | 0.5-10% | 0.5%-30% |
| Premixed glass beads | 0%-30% | Reflective after surface wear |
| Calcium Carbonate Sand | 30%-80% | Whiteness Wear-resistant Hardness |
| PE Wax | 1%-1.5% | Cold and heat resistant |
| EVA | 0.5%-1% | Crack resistance |
| Plasticizer | 1%-1.5% | Toughness |
Different Standards
| AASHTO Standard | ||
| Components | Specification | Test Result |
| Resin | ≥ 20% | 22% |
| Titanium Dioxide | ≥ 10% | 10.2% |
| Glass Beads | ≥ 30% | 32% |
| British Standard | ||
| Components | Specification | Test Result |
| Resin | ≥ 20% | 21% |
| Titanium Dioxide | ≥ 10% | 12% |
| Glass Beads | ≥ 20% | 21% |
| China Standard | ||
| Components | Specification | Test Result |
| Resin | ≥ 15% | 16.1% |
| Titanium Dioxide | ≥ 5% | 8% |
| Glass Beads | ≥ 20% | 22% |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.