China High-Index Reflective Thermoplastic Road Marking Paint Powder Coating With Glass Beads Mainly Resin Product for sale

High-Index Reflective Thermoplastic Road Marking Paint Powder Coating With Glass Beads Mainly Resin Product

Name: High-Index Reflective Thermoplastic Road Marking Paint Powder Coating With Glass Beads Mainly Resin Product
Brand: Guangdong Hua Qun Traffic Facilities Co., Ltd. By Shares

Price Negotiable

Price: Pending

MOQ: 1 ton

Delivery Time: 3-7work days

Brand: HUA QUN

Product Description

High-Index Reflective Thermoplastic Road Marking Paint Powder Coating with Glass Beads Mainly Resin Product

Product Description

Thermoplastic paint is a type of durable, heat-applied coating commonly used for road markings, traffic signs, and other outdoor applications. It’s made from a mixture of synthetic resins, pigments, glass beads (for reflectivity), and fillers that solidify when cooled after being heated to a molten state. Unlike regular paint, which dries through solvent evaporation, thermoplastic paint is applied in a hot, liquid form (typically at temperatures between 180°C and 220°C or 356°F to 428°F) and hardens as it cools, forming a thick, tough layer that bonds well to surfaces like asphalt or concrete.

It’s popular for its longevity, weather resistance, and ability to withstand heavy traffic. The glass beads embedded in it enhance visibility at night by reflecting light from vehicle headlights. You’ll see it in things like lane lines, crosswalks, or parking lot markings. There are two main types: hydrocarbon-based (derived from petroleum) and alkyd-based (made from natural oils), with the former being more common due to cost and performance.

Specification

Gravity(g/㎥)	2.1g/㎥
Color	Yellow, Orange, Red and etc.
Heating Temperature	180℃-220℃
Softening Point(℃)	110℃
Coating Appearance	No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)	Within 3 minutes
Chroma Performance	Reverse materials(white)
Compressive Strength(Mpa)	26
Abrasive Resistance(mg)	42
Alkali Resistance	Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)	19%
Fluidity(s)	40s
Coating Resistance	Resis -10℃ for 4 hours
Package	25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance	Under 200℃-220℃ for hours
Material	C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application	Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance	Great (in water for 24 hours)

Steps to Use Thermoplastic Paint:

Surface Preparation:
- Clean the surface thoroughly to remove dirt, dust, oil, or loose debris. Use a broom, wire brush, or pressure washer as needed.
- Ensure the surface is dry, as moisture can prevent proper adhesion.
- For porous surfaces like concrete, you may need to apply a primer to enhance bonding. Check the manufacturer’s instructions.
Heat the Thermoplastic:
- Load the thermoplastic material into a preheater or melting kettle.
- Heat it to the recommended temperature, typically between 180°C and 220°C (356°F to 428°F), depending on the specific product. Stir occasionally to ensure even melting and to avoid scorching.
- Monitor the temperature carefully—overheating can degrade the material.
Test the Consistency:
- The molten thermoplastic should have a smooth, liquid consistency, free of lumps. If it’s too thick, it won’t apply evenly; if too thin, it may not set properly.
Apply the Paint:
- For Road Markings: Use a striping machine or screed box to pour the molten thermoplastic onto the surface in the desired pattern. Work quickly, as it begins to cool and harden once applied.
- For Smaller Areas: Use a hand-held applicator or trowel to spread the material evenly.
- Maintain a consistent thickness (usually 1.5–3 mm, depending on the project requirements).
Add Glass Beads (Optional):
- For reflective markings (e.g., road lines), sprinkle glass beads over the wet thermoplastic immediately after application. The beads will embed as it cools, improving visibility.
Cooling and Setting:
- Allow the thermoplastic to cool and harden naturally. This typically takes 5–15 minutes, depending on the ambient temperature and thickness. Avoid disturbing the area during this time.
Clean Up:
- Clean your equipment while the thermoplastic is still warm using a scraper and solvent (if recommended by the manufacturer). Once it hardens, removal becomes much harder.

Technical Specification

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM