China Make Road Marking Easy With Thermoplastic Paint Durable High-Visibility For Traffic Lines for sale

Make Road Marking Easy With Thermoplastic Paint Durable High-Visibility For Traffic Lines

Price Negotiable

Price: Pending

MOQ: 1 ton

Delivery Time: 3-7work days

Brand: HUA QUN

Product Description

Make Road Marking Easy with Thermoplastic Paint Durable and High-Visibility for Traffic Lines

Product Description

Thermoplastic paint is a durable, heat-applied road marking material with resins, pigments, and glass beads for reflectivity. Used for traffic lines and symbols, it lasts 3-5 years, offers high visibility, and bonds well to roads. Applied at 200-220°C, it’s cost-effective for high-traffic areas but needs careful surface prep and is hard to remove.
 

Main Features of Thermoplastic Paint:
 
Composition: Made from synthetic resins, plasticizers, pigments, and glass beads for reflectivity.
Application: Applied at 200-220°C using specialized equipment, solidifies quickly upon cooling.
Durability: Lasts 3-5 years, resisting wear from traffic and weather.
Visibility: High reflectivity, especially at night, due to glass beads.
Versatility: Available in colors (white, yellow, etc.) for road lines, crosswalks, and symbols.
Adhesion: Bonds strongly to asphalt and concrete surfaces.
Skid Resistance: Provides good traction for vehicles and pedestrians.
Advantages of Thermoplastic Paint:
 
Long-Lasting: Reduces maintenance and reapplication frequency compared to regular paint.
Cost-Effective: Higher initial cost offset by extended lifespan, ideal for high-traffic areas.
Enhanced Safety: Superior visibility and skid resistance improve road safety.
Quick Application: Fast-drying, minimizing traffic disruptions.
Eco-Friendly Options: Low-VOC formulations available, reducing environmental impact.
Versatile Use: Suitable for highways, urban roads, parking lots, and airports.

Applying Thermoplastic Paint:

Clean and dry the road surface; repair cracks.
Apply primer if needed (concrete/old asphalt).
Mark layout with chalk or stencils.
Heat thermoplastic to 200-220°C until molten.
Apply using a handliner (small areas) or machine (large areas), 1.5-3 mm thick.
Add glass beads for reflectivity (optional).
Let cool 5-10 minutes; inspect and clean up. Tips: Apply in dry, warm conditions; use safety gear.

Technical Specification

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM