China High-Visibility Skid-Resistant Thermoplastic Powder Paint For Safe Road Markings for sale

High-Visibility Skid-Resistant Thermoplastic Powder Paint For Safe Road Markings

Price Negotiable

Price: Pending

MOQ: 1 ton

Delivery Time: 3-7work days

Brand: HUA QUN

Product Description

High-Visibility and Skid-Resistant Thermoplastic Powder Paint for Safe Road Markings

Product Description

Thermoplastic paint is a durable, heat-applied road marking material with resins, pigments, and glass beads for reflectivity. Used for traffic lines and symbols, it lasts 3-5 years, offers high visibility, and bonds well to roads. Applied at 200-220°C, it’s cost-effective for high-traffic areas but needs careful surface prep and is hard to remove.
 

Main Features of Thermoplastic Paint:
 
Composition: Made from synthetic resins, plasticizers, pigments, and glass beads for reflectivity.
Application: Applied at 200-220°C using specialized equipment, solidifies quickly upon cooling.
Durability: Lasts 3-5 years, resisting wear from traffic and weather.
Visibility: High reflectivity, especially at night, due to glass beads.
Versatility: Available in colors (white, yellow, etc.) for road lines, crosswalks, and symbols.
Adhesion: Bonds strongly to asphalt and concrete surfaces.
Skid Resistance: Provides good traction for vehicles and pedestrians.
Advantages of Thermoplastic Paint:
 
Long-Lasting: Reduces maintenance and reapplication frequency compared to regular paint.
Cost-Effective: Higher initial cost offset by extended lifespan, ideal for high-traffic areas.
Enhanced Safety: Superior visibility and skid resistance improve road safety.
Quick Application: Fast-drying, minimizing traffic disruptions.
Eco-Friendly Options: Low-VOC formulations available, reducing environmental impact.
Versatile Use: Suitable for highways, urban roads, parking lots, and airports.

How to Use Thermoplastic Road Marking Paint:
 
Prepare the Surface:
Clean the road (asphalt/concrete) to remove dirt, oil, and debris.
Ensure the surface is dry and free of moisture.
Fill cracks or repair damaged areas.
Prime (if Needed):
Apply a primer on concrete or worn asphalt for better adhesion, per manufacturer guidelines.
Mark the Layout:
Outline markings (lines, symbols, crosswalks) using chalk, tape, or stencils.
Heat the Thermoplastic:
Load thermoplastic material into a melting kettle or preheater.
Heat to 200-220°C, stirring for a uniform molten consistency.
Apply the Paint:
Small Areas: Use a handliner or screed box to pour and spread molten thermoplastic evenly (1.5-3 mm thick).
Large Areas: Use a road marking machine to extrude or spray the material.
Optionally, sprinkle glass beads on wet surface for reflectivity.
Cool and Set:
Allow 5-10 minutes for cooling and hardening, depending on weather.
Keep traffic off until fully set.
Inspect and Clean:
Verify thickness, adhesion, and alignment.
Remove stencils and clean equipment.
Tips:
Apply in dry, warm conditions (above 10°C).
Wear protective gear (gloves, masks) due to high temperatures.
Follow manufacturer instructions for equipment and material.

Technical Specification

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM