Reflective Thermoplastic Paint for Road Marking Offering Durable Thick Lines and Improved Nighttime Visibility on Multi Level Highways
Thermoplastic road marking paint is mainly used for more than 2 level road and highway. The thickness of lines made from this coating is (1.0 ~ 4.0) mm, paint mixed with reflective glass beads, and in the construction, spread the reflective glass beads on the surface. This type of marking line has good nightly reflective performance, long service life, generally up to 2 ~ 3 years. Thermoplastic road marking paint needs special heater device in constructions. In second re-marking construction of old marking lines, you should eliminate the thick old marking line firstly.
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45*70*5CM |
-
Good use effect& quick-drying
①The coating film of hot melt paint has complete clear lines, sharp edges and corners, high vividness and three dimensional effect.
②It can be dry and open to traffic 1-3 minutes after painting, and construction can even be carried out without blocking traffic.
-
Excellent wear resistance& Reflective at night
①The coating film of this paint is durable and the service life of the marking can up to 2 years. Stronger adhesion, Good liquidity, stronger weather resistance, high compressive strength..
②Since the paint is mixed with glass beads, marking coating is strong reflection at night, traffic accidents can be reduce
| Customized Formula | ||
| Customized Formula | Content(Customized range) | Characteristics |
| C5 Resin | 10%-22% | Fluidity Toughness Hardness Adhesion |
| Titanium Dioxide | 0.5-10% | 0.5%-30% |
| Premixed glass beads | 0%-30% | Reflective after surface wear |
| Calcium Carbonate Sand | 30%-80% | Whiteness Wear-resistant Hardness |
| PE Wax | 1%-1.5% | Cold and heat resistant |
| EVA | 0.5%-1% | Crack resistance |
| Plasticizer | 1%-1.5% | Toughness |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.