Atlas O-Ring 1622179800 for Air Compressor Sealing
Price:
USD11/pcs
MOQ:
1
Delivery Time:
15-20 work days
Brand:
Atlas
Product Description
Atlas O-Ring 1622179800 - High Quality Screw Air Compressor Parts
O-Ring Product Introduction
An O-Ring is a torus-shaped sealing component designed to prevent fluid or gas leakage in static or dynamic applications. Made from elastomers or thermoplastics, it compresses between mating surfaces to create a reliable, pressure-resistant seal.
Key Features & Benefits
- Versatile Sealing - Effective in static, rotary, and reciprocating motion
- Wide Material Options - NBR, Viton®, EPDM, Silicone, and more for chemical/thermal resistance
- High Pressure/Vacuum Tolerance - Up to 5,000 psi (depending on material/hardness)
- Cost-Effective - Low-cost solution with long service life
- Easy Installation - Simple to replace with minimal tools
Common Materials & Properties
| Material | Temperature Range | Best For | Key Resistance |
|---|---|---|---|
| NBR (Nitrile) | -40°C to +120°C | Hydraulic oil, fuel, water | Oil, abrasion |
| Viton® (FKM) | -20°C to +200°C | Chemicals, high heat | Acids, solvents |
| EPDM | -50°C to +150°C | Steam, hot water | Weather, ozone |
| Silicone | -60°C to +230°C | Food, medical | Extreme temperatures |
| PTFE | -260°C to +260°C | Corrosive fluids | Almost all chemicals |
Standard Sizes & Specifications
- Sizes: AS568 (US), ISO 3601 (Metric), JIS B2401 (Japan)
- Hardness (Shore A): 50 (soft) to 90 (hard)
- Cross-Section: 1.78mm (0.070") to 8.63mm (0.340")
- Colors: Black (standard), custom colors for identification
Applications
- Automotive: Fuel injectors, engine gaskets, transmissions
- Aerospace: Hydraulic systems, fuel lines
- Plumbing: Water faucets, pipe fittings
- Industrial: Pumps, valves, compressors
- Medical: Sterile equipment, fluid handling
Selection Guide
- Chemical Exposure - Choose material compatible with fluids/gases
- Temperature - Ensure material operates within system range
- Pressure - Higher pressure requires harder O-rings (70-90 Shore A)
- Motion Type - Dynamic applications need abrasion-resistant materials
Installation & Maintenance Tips
Do's & Don'ts:
- Do lubricate with compatible grease (silicone, PTFE)
- Do check for nicks/cuts before installation
- Don't over-stretch (max 5% diameter increase)
- Don't twist during assembly
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Quansi Industrial (Guanyun) Co., Ltd.
Location
1st-2nd floor, west side of Building 6, Chengbei Science and Technology Park, Guanyun County, Lianyungang City, Jiangsu Province China
Contact Person
Emily Tang