TUV CE ISO OTR-3000 380V Industrial High Power 5-in-1 Handheld Fiber Laser Welding Machine with Lifetime Warranty

3000W + dual wire feeding + five-in-one = one machine equals five machines. Based on the "welding/slicing/washing/precision washing" four-in-one function, it adds energy storage welding (for batteries/precision parts), mainly targeting medium-thick plates, large gaps, difficult-to-weld aluminum and copper, precision energy storage welding, and production without grinding.

• Laser: 3000W continuous fiber laser (Ruike/Chengxin/JPT), wavelength 1080nm, lifespan over 100,000 hours.
• Dual wire feeding system: Standard equipped with dual wire feeding machines, supporting single wire/double wire switching; dual wires can use 1.6–2.0mm welding wires, wire feeding rate doubles, fusion rate increases by 60%, and the maximum weld gap is 1.5mm.
• Five-in-one function: Laser welding + energy storage welding + laser cutting + laser cleaning + weld seam cleaning.
• Cooling: Industrial dual temperature water cooling, 24-hour continuous operation, stable operation within environmental temperature range of 5–40℃.
• Power supply/Power consumption: 380V three-phase, total machine power consumption approximately 12kW, weight approximately 180–235kg.
• Welding gun: Approximately 0.8kg, fiber 15–20 meters; with oscillation welding (swing range 0–8mm), one-time formation of wide weld seam; replaceable multi-functional nozzles, switchable without changing the lens.

• Carbon steel/Stainless steel: 0.8 - 12mm (full power penetration depth 8mm, double wire feeding can stack up to 2mm).
• Aluminum/Aluminum alloy: ≤8mm (double wire feeding prevents collapse, high reverse suppression strong, less prone to blow-through).
• Copper/Brass: ≤6mm (high power + double wire feeding, stable soldering of copper).
• Gap tolerance: Maximum 1.5mm, no need to make bevels, single-sided welding results in double-sided formation.
• Weld quality: Minimal heat affected zone, almost zero deformation; weld is smooth and shiny, porosity rate <0.3%, rework is rare.

1. Laser welding (main): Dual wire feeding + oscillation, suitable for thick plates with fast speed, large gap and high strength; the speed is 30-40% faster than 2000W and 8-12 times faster than argon arc welding.
2. Energy storage welding (new addition - precision-specific): Similar to resistance welding, without compressive force, suitable for lithium battery tabs, copper-aluminum connection pieces, and precision electronic components. The weld points are firm, without blackening and do not damage the base material.
3. Laser cutting: Carbon steel ≤ 6mm, stainless steel ≤ 5mm, aluminum ≤ 3mm. The cutting surface has no burrs and does not blacken, and no grinding is required.
4. Laser cleaning: Strong rust removal/oil removal/finish removal/oxidation layer removal, without damaging the base material, no consumables, and high efficiency.
5. Weld seam cleaning: After welding, it directly produces a silvery white shiny surface, no need for grinding and polishing, and the appearance parts are completed in one step.

• Double the cladding rate: Dual wire feeding simultaneously, no collapse in large gaps/thick plates, more饱满 weld seams.
• Full function coverage: Added energy storage welding, capable of welding both precision parts and thick plates, wider application scenarios.
• Efficiency ceiling: 3000W + dual wire feeding, efficiency ≈ 2 units of 2000W single wire feeding, 10 times faster than argon arc welding.
• Material unlimited: Fully compatible with carbon steel, stainless steel, aluminum, copper, galvanized plates, more stable for high-reflection materials.
• People and space saving: Zero learning time within 15 minutes, no need for welding certification； one unit replaces 5 units of equipment, saves 50% labor + 70% space.

• Sheet metal processing: 8-12mm chassis, cabinets, pressure vessels, shelves.
• New energy: Energy storage cabinets, battery trays (aluminum 8mm), charging stations, lithium battery tab welding.
• Kitchen and bathroom hardware: Thick stainless steel sinks, shower rooms, high-end kitchenware.
• Automotive / construction machinery: Chassis, frames, wheels, mold repair, precision parts welding.
• Stainless steel engineering: Thick plate decoration, guardrails, doors and windows, elevator plates.
• Precision manufacturing: Lithium batteries, electronic components, copper-aluminum dissimilar metal welding.