Industrial Grade 98% Trisodium Phosphate For Adjust PH Value
| Attribute | Value |
|---|---|
| CAS | 15475-67-9 |
| EINECS | 231-509-8 |
| Appearance | White crystal |
| Crystalline Hydrate | 12 Crystal water |
| Dissolubility | Water soluble |
| PH | 11~12 |
| Chemical Formula | Na3PO4·12H20 |
Industrial grade Trisodium phosphate 98% White crystal for chemical materials.
12 water trisodium CAS 10101-89-0 Industrial 98.5% Na3O4P *12H2O
Molecular formula: Na3PO4.12H20
Molecular weight: 380.12
- Colorless acicular hexagonal crystal system
- Soluble in water, insoluble in organic solvents
- Relative density 1.62(20°C)
- Melting point 73.3-76.7°C (decomposition)
- When weathered in dry air, 12 crystalline waters are lost at 100°C to form anhydrous substances (Na3PO4)
- The aqueous solution is alkaline and has a certain corrosive effect on the skin
Used as water softener in metallurgy, chemical industry, textile, printing and dyeing, paper making, mechanical and electrical industry, etc. Boiler tube cleaning agent and detergent, metal rust prevention agent, fuel intermediate desiccant, sugar juice purification agent, photographic developer, fabric mercerizing enhancer, rubber milk coagulant, dental binder. It also has a certain role in pharmaceutical preparations.
Products: Trisodium phosphate/TSP
- Industrial grade (12 crystal water) TSP CAS 10101-89-0 98% Na3O4P 12H2O
- Industrial grade (anhydrous) TSP CAS 7601-54-9 98% Na3O4P
- TSP CAS 7601-54-9 97% Na3O4P
| Items for detecting and analyzing | Standard value % |
|---|---|
| Main content: trisodium phosphate ≥ | 98 |
| Sulphate (as SO4)≤ | 0.50 |
| Chlorine (as Cl) ≤ | 0.30 |
| water insoluble≤ | 0.05 |
| Methyl orange alkalinity (Na2) | 16.5-19.0 |
| Iron (Fe)≤ | 0.01 |
| Arsenic (as As)≤ | 0.005 |
| Analysis | Test Method | Standard request |
|---|---|---|
| TSP content % | GB 25565-2010 | ≥97 |
| Water insoluble % | GB 25565-2010 | ≤0.2 |
| pH value (10g/mL) | GB 25565-2010 | 11.5-12.5 |
| Fluoride (as F) ppm | GB 25565-2010 | <50 |
| Arsenic (as As) ppm | GB 25565-2010 | <3 |
| Heavy Metal(as Pb) ppm | GB 25565-2010 | <10 |
| Lead ppm | GB 25565-2010 | <4 |
| Loss on drying % | GB 25565-2010 | <2 |
| P2O5 % | GB 25565-2010 | ≥43 |
When trisodium dihydrate dissolves in water, it dissociates into PO₄³⁻ ions, making the solution strongly alkaline (pH≈11-12), and is an ideal pH regulator and buffer.
- Neutralize acidic wastewater: Used in electroplating, chemical engineering, printing and dyeing and other industries to neutralize acidic wastewater (such as residual sulfuric acid and hydrochloric acid), and prevent corrosion of pipelines and equipment.
- Stabilize the pH value of the system: In boiler water and circulating cooling water, it can maintain an alkaline environment (pH 9-11) for a long time, prevent acidic corrosion and extend the service life of equipment.
- Compared with NaOH (caustic soda), its alkalinity is milder and it is less likely to cause local excessive alkalinity.
- Used in combination with other water treatment agents: When compounded with corrosion inhibitors (such as sodium silicate) and scale inhibitors (such as sodium hexametaphosphate), it optimizes the water treatment effect.
- Industrial wastewater treatment: Adjust the acidic wastewater to neutral to meet the discharge standards (such as pH 6-9).
- Boiler water treatment: Maintain an alkaline environment, prevent acidic corrosion and oxygen corrosion, and protect metal pipes.
- Electroplating/metal surface treatment: Used for neutralization after degreasing and pickling to prevent the corrosion of the workpiece by residual acid.
- Dosage control: Needs to be adjusted in real time according to the pH of the water quality. Excessive use may cause the pH to be too high (>12), affecting subsequent treatment.
- Phosphorus content limit: The discharge of wastewater containing phosphate must comply with environmental protection standards. If necessary, chemical precipitation methods (such as adding aluminum salts or iron salts) should be used in combination for phosphorus removal.
- Solubility: Hydrates are more soluble than anhydrous products and are suitable for rapid pH adjustment, but they have lower active ingredients and the actual dosage needs to be calculated.
We can accept T/T and L/C at sight as payment term.
Of course! We specialized in this line for many years, many customer make a deal with me because we can deliver the goods on time and keep the goods top quality!
Yes, we can provide free sample. You only need to take the express fee.
We always take the customer's benefit as the top priority. Price is negotiable under different conditions, we are assuring you to get the most competitive price.
Sure. You are very welcomed to visit our company in Weifang, China. (We will have someone responsible for picking up and dropping off at Weifang Airport)
We have a professional and perfect after-sales service team, timely for you to deal with all problems.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.