>> LED radar speed signs made in 2 or 3 7 segment digit, can set the limit speed number by remote controller. Inform the driver
limit speed: show green number in limit speed and show red number out of limit speed.
>> When the vehicle drive into the radar detection area (about 100m in the front of radar sign), the microwave radar will
automatically detect the speed of the vehicle and the speed will be displayed in the sign to remind the driver to reduce driving
speed, which Effectively reduce the road traffic accidents caused by high speed driving.
>> Speed feedback device has a significant eye-catching induction driving function, can significantly reduce traffic accidents, to
achieve safety guidance.
Static Constant Current Highway Solar LED Speed Limit Sign Mobile Variable Message Sign
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Static Constant Current Highway Solar LED Speed Limit Sign with Radar ≥30° Viewing Angle
Products Overview
Product Parameter
12'' Digitals Height
13.4'' Digitals Height
Speed Feedback Device Components
1.Speed limited sign (indicating the speed limit of the road section)
2.Such as "Please note your speed" and a dynamic LED (Conductor light-emitting diode) display, the above data shows the vehicle's
speed
3.Microwave radar test the speed
4.Solar power with solar power supply system
2.Such as "Please note your speed" and a dynamic LED (Conductor light-emitting diode) display, the above data shows the vehicle's
speed
3.Microwave radar test the speed
4.Solar power with solar power supply system
Speed feedback device install instructions
1.Fix the solar panel on the frame, and then fixed on the speed feedback instrument with screws and nuts. The white wires are used to connect the solar panels and the batteries in the speed feedback box, and the positive and negative electrodes are connected one by one.
2.The speed feedback device fixed on the road left or right, or just above the road ,so that the direction of the radar port to the car, the tilt angle of not more than 15 degrees, if it is fixed above the road, the radar fixed position should be radar Cavity oblique angle alignment to the car location. At the same time, the higher the distance between the radar and the ground, the farther away the radar work. Generally, The distance from the ground to radar in 2-7 m is better.
3.Open the speed feedback device's back cover, connected The radar data cable, control board connector one by one. And then adjust of the radar position, so that it position the car.
4.When the speed feedback device over the top,fixed the speed feedback with a screw to the column.
2.The speed feedback device fixed on the road left or right, or just above the road ,so that the direction of the radar port to the car, the tilt angle of not more than 15 degrees, if it is fixed above the road, the radar fixed position should be radar Cavity oblique angle alignment to the car location. At the same time, the higher the distance between the radar and the ground, the farther away the radar work. Generally, The distance from the ground to radar in 2-7 m is better.
3.Open the speed feedback device's back cover, connected The radar data cable, control board connector one by one. And then adjust of the radar position, so that it position the car.
4.When the speed feedback device over the top,fixed the speed feedback with a screw to the column.
Project Case
Contact
Shenzhen Glare-LED Optoelectronic Co., Ltd Add: 1-4 floor, B2 building, No. 10 Tongqing Road, TongXin village, Baolong avenue, Longgang District, Shenzhen City, Guangdongprovince, China P.C: 518116
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN GLARE-LED OPTOELECTRONIC CO., LTD
Location
Builing A3, Yingzhan Technology Park, 8 Tongfu Road ,LongTian Community,LongTian Avenue, PingShan District,Shenzhen City,Guangdong PR of China
Contact Person
Tracy Liu