China Dual Shaft CNC Controller Kit MACH3 Nema23 Stepper Motor USB 4 Axis 112mm for sale

Dual Shaft CNC Controller Kit MACH3 Nema23 Stepper Motor USB 4 Axis 112mm

Price Negotiable

Price: $86-92

MOQ: 1 kit

Delivery Time: 2-7 work days

Brand: Rattm Motor

Product Description

3 Axis MACH3 Nema23 Stepper Motor Dual Shaft 112mm + 4 Axis CNC Motion Control Card USB Board For CNC Controller Kit Dri

Stepper motor's red wire connect to driver's A+ port
Stepper motor's green wire connect to driver's A- port
Stepper motor's yellow wire connect to driver's B+ port
Stepper motor's blue wire connect to driver's B- port

DM556S Stepper Motor Driver


It adopts the latest 32-bit DSP digital processing technology. The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology. The auto-tuning function is integrated in the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motors. Users can set 200-51200 within the arbitrary subdivision and rated current within the arbitrary current value, to meet the needs of most applications. Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise. Can drive 4,6,8-wire two-phase stepper motor,suitable for Nema 17,Nema23,Nema24 and Nema34 Stepper Motor;Automatic halving of current at rest.	Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A; Impulse response frequency up to 500KHz (factory default 200KHz) Photoelectric isolation, alarm output Photoelectric isolated differential signal input It has rising/falling edge, IO control spontaneous pulse, single/double pulse, high response/high speed and low vibration, self-measuring function. It has the protection functions of overvoltage, undervoltage and overcurrent. Variable current control greatly reduces the heat generation of the motor Ultra-low vibration noise.	Dial Switches SW1-SW3: Set The Operating Current (1.0A-6.0A) SW4 is a Half-Current function,when SW4=off,for half-current setttings,when SW4=on,current static state for full-current lock axis SW5-SW8: Set the speed of subdivision and spontaneous pulses Function Setting: SW9:Edge sel,off=fall,on=rise SW10:S-Filter,off=4ms,on=10ms SW11-SW12:Mode Sel

4 Axis USB Mach3 control board


Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable. Support for connecting electronic handwheel; MCU model: three generation 32-bit STM processor Communication plug-in: RnR motion control card - ECO-2.0	4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device.	Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor; Have 0-10V signal output,you can use mach3 software to control the spindle motor speed. One status LED, indicate connection status on the board.

Please strictly follow the instructions and warnings before using this product:

It is recommended that the limit switch and emergency stop switch must be installed first and can be used normally.
The output singal of theelectronic handwheel must be 5V, more than 5V output will damage the hand wheel interface.
This interface can output 0-10V analog signals
USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.
This control board does not require any drivers to be installed,as long as Mach3 can run, the control card can be used;
Support computer system: Windows 2000/ XP / Windows 7/8/10 (if your Win10 computer can not recognize the card,pls let us know so that we can help you solve the problem)
The inverter interface (AVI +, AVI-) is isolated from the computer and the main control circuit, and has strong anti-interference ability,no interference signal will be introduced due to the introduction of external strong electrical equipment.
Whether frequency converter is supported: Yes
Support PWM: Yes
Number of control axes: X.Y.Z.A axis

Model: S-400W-36V
Output Current:11A
Output Voltage:36V
Output Frequency:85%
Output Power: 400W
L: Live wire
N: Negative wire
+V: DC power output “+”
-V: DC power output “-“
+V ADJ: output voltage regulation

400W 36V 11A DC Switching power supply


Adopting high-quality shell,with better heat dissipation performance of the radiator,the power supply lasts for a long time and has a long service life. It comes with built-in cooling fan and many holes on the metal case, which makes heat dissipation more efficient.	Enough widing coils ensure pure copper,reliable performance,sufficient power,and stable work. High efficiency and low operation temperature.	110V or 220V Input: 110-120V AC or 220-240V Please flip the side input voltage selector switch