China ATC BT30 Spindle Motor 800Hz 380V 7.5KW For CNC Engraving Machine for sale

ATC BT30 Spindle Motor 800Hz 380V 7.5KW For CNC Engraving Machine

Price Negotiable

Price: USD1348-1646/Piece

MOQ: 1

Delivery Time: 3-5 work days

Brand: RATTM MOTOR

Product Description

7.5KW ATC Air CNC Spindle Motor BT30 Automatic Tool Changer 800Hz 380V For CNC Engraving Machine

Good News: We have warehouse in some countries, check as bellows

Oversea warehouse-Fast Shipping-Free VAT Tax
Warehouse location	Shipping Carrier	Delivery Countries	Delivery Time	Advandge
Germany&Czech Republic	DHL/GLS	EU Countries	3-12 Business days	1. Fast Delivery 2. No VAT Tax
United States	UPS/USPS	United States only	3-12 Business days	1. Fast Delivery 2. No VAT Tax

Package include:

1 x 7.5KW Square ATC Automatic Tool Changer Air spindle motor 380V (4 bearings BT30 800hz 24000rpm)

1 x BT30-ER25 Tool Holder with 45 degree pull stud
2 x Air plug
English user manual

1.This spindle is built-in type spindle motor, built-in three asynchronous motors,by the inverter control.As the spindle has a compact structure,high power, big torque, small vibration, low noise characteristics,so it can achieve high speed,high powe cutting,high recision and high stability operation.

2.The bearing of spindle use grease lubricated angular to contact bearings,can be achieved lifelong lubricating within the life cycle.

3.This spindle uses air cooling to cool the motor and front and rear bearings. The wind is provided by the fan at the rear end, from the rear of the spindle through the inner and outer air slots directly to the front of the spindle, there by taking away the heat generated by the high-speed rotation of the spindle, achieving thermal balance, and keeping the temperature of the electric spindle within a certain value.

4.The spindle built-in PTC 140 temperature sensor(Technical parameters are visible in other sections of this specification),you can read it anytime if you need to protect the motor temperature.

5. The tool clamping methods:this spindle built-in automatic tool change

device,shank form is BT30.

Please note that when stopping the spindle, you need to wait until the spindle is stopped before using the tool, so as to avoid causing the spindle and the tool mechanism to be connected together and cannot be separated. When loosening the tool and broaching the tool, you need to return the air, and pls keep the air intake and return air during the whole work.

Spindle installation explanation

1.Fan cooling system description When the spindle rotates, the rear fan system must be started to ensure the correct supply voltage and the supply voltage is 12V.

2.Air sealing control (AS)

In order to prevent water or impurities enters internal of the spindle,spindle will have gas sealing device,the gas seal machine must be started start with the machine at the same time. And the need to go through multi-stage filtration.

3.Compressed gas quality requirements

The quality requirement of gas which is used in gas seals:

Oil content:﹤0.01mg/m³

solid particle:﹤5µ m

Pressure dew point:﹤7.5℃(0.7MPa)

3. Running-in program instructions

Only all monitoring issued no failures operational signals,at the same time,all safety devices have been installed and working properly,then allow start spindle. Note: new or spindle which is not used for a long time must to be running slowly.First,start run spindle for half an hour as 25% of the maximum speed,then increase to 50% of the maximum speed,to run 15 minutes,finally,

increase to maximum speed.It’s need to check the temperature of the spindle during the whole process, spindle will get hot, but not hot hand, if the spindle becomes hot, pls stop the operation and contact our customer service department.

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Changzhou Powace Internation Co., Ltd.

Location No. 88 Huashan Road, Xinbei District, Changzhou City

Contact Person Shi

Request A Quote

Email Address *

Please check your email address.

Phone / WhatsApp

Your Message *

Your message must be at least 20 characters.

ATC BT30 Spindle Motor 800Hz 380V 7.5KW For CNC Engraving Machine

Raycus Max JPT Fiber Laser Marker 20W-100W Stainless Steel Metal Jewelry Engraver

2N.M Nema23 Closed Loop Servo Motor 76mm HSS57 For CNC Controller Kit

CNC BT30 Spindle Motor Automatic Tool Change 6000rpm No Power Kit

Air Cooling Spindle Motor Kit ER16 Collet 1.5KW 220V For CNC Wood Engraving

6.0kw ER32 Air Cooled Spindle Motor 18000rpm For CNC Engraving Machine

4540 Router CNC Engraving Machine 500W Spindle 11000rpm 3 Axis

20W-100W Optical Fiber Laser Engraver Cutting Gold Silver Ring

Nema 34 Closed Loop Stepper Motor Kit 116mm 2HSS86 For CNC Controller Milling

CNC 2.2KW Spindle Motor Water Cooling 220V ER20 Collet For Woodworking Engraving

2.2kw ER20 Water Cooled CNC Spindle Motor Waterproof 220V For Metal Engraving

1.8KW ISO20 ATC Spindle Motor Automatic Tool Change 80mm For CNC Router Machine

3018 PRO CNC Engraving Machine CNC Wood Router 3 Axis GRBL DIY Mini

Get in Touch

Request A Quote