Plastic Type PP/PE Recycling Machine Prices Plastic Bottle Crushed Scrap Crusher Machine
Price:
$2,600.00/sets 1-4 sets
MOQ:
1 set
Delivery Time:
Negotiable
Brand:
AITE
Product Description
Products Description
Plastic Crusher Machine
1、Plastic crusher refers to crushing all kinds of plastic and rubber, such as plastic profiles, pipes, rods, wires, films, waste rubber products. The granular material can be directly used as raw material for extrusion. 2、The machine adopts alloy steel blade, with long service life; The machine adopts a separate design, easy to repair and clean, and has a double-layer structure, equipped with sound insulation materials, low noise, knife shaft seat through strict balance test, machine base and equipped with four wheels, easy to move.
Product Features
1) Strong structure, easy to operate, low electricity consumption & durable
2) Uses high quality steel material especially for making knives of the crushers, the machine stands long use under severe and continuous service conditions.
3) The blades can be grinded for many times and can be used repeatedly
4) Blades base is made of high quality steel, hard to be broken and damaged; Blades base structure is stable and durable
5) With flat type, claw type and cross type blade and screen with different hole size for chose to suit various demand.
6) With double reduce noise layer design to reduce noise output.
7) Has protection system with the power supply to ensure the equipment safe
8) Easy to clean and maintain, the hopper, crusher room, blades and screen can be removed and mounted easily.
9) Necessary for the plastic extrusion machines and other plastic recycling industry.
3) The blades can be grinded for many times and can be used repeatedly
4) Blades base is made of high quality steel, hard to be broken and damaged; Blades base structure is stable and durable
5) With flat type, claw type and cross type blade and screen with different hole size for chose to suit various demand.
6) With double reduce noise layer design to reduce noise output.
7) Has protection system with the power supply to ensure the equipment safe
8) Easy to clean and maintain, the hopper, crusher room, blades and screen can be removed and mounted easily.
9) Necessary for the plastic extrusion machines and other plastic recycling industry.
Product Parameters
Model | Aite-400 | Aite-500 | Aite-600 | Aite-700 | Aite-800 | |||||
Inlet mm | 380*240 | 500*300 | 630*340 | 380*710 | 815*470 | |||||
Capacity kg/h | 200-300 | 300-350 | 350-450 | 450-500 | 500-600 | |||||
Fixed blade PCS | 2 | 2 | 2 | 2 | 2 | |||||
Moving blade PCS | 12 | 15 | 18 | 24 | 24 | |||||
Power (kw) | 7.5 | 11 | 15 | 22 | 30 | |||||
Overall (mm) | 1030*840*1500 | 1230*1010*1530 | 1320*1110*1830 | 1560*1310*2100 | 1730*1400*2300 | |||||
N.W (kg) | 500 | 900 | 1100 | 1500 | 2000 | |||||
Notes: 1. The number of blade claws, diameter, and thickness can be customized according to the type of material and the size of the discharge. 2. The output of the equipment will be different depending on the type of material and the size of the discharge. | ||||||||||
Product Application
1、It can be used to tear up solid materials such as plastic, rubber, fiber, paper, wood, electrical parts, cables, etc. which are hard to break, such as: nozzle material, rubber head, PET bottle, cardboard, circuit board, wood, plastic barrel, etc.
2、You can select the corresponding model according to the material size and handling capacity. If users need to break especially hard materials, such as nylon, ABS, PC and other high-strength engineering plastics, they need to explain the situation.
Final Product
Product Details
1.Use SKD-II/D-2 Blade(Japan and US Standard),it can grinder 20~25 times by sharpening machine .
2.Shaft made by 40Cr steel with quenching treatment .
3.Chamber made by solid steel 40 mm thickness.
4.Feed hooper easy open and easy change blade/screen for worker.
5.With heavy duty pulley easier for machine working.
6.Use the big roller bearing ensure its long time use
7.Bearing house is outside of the crusher chamber so no dirty goes inside for longer use .
8.Frame made by solid square tube steel 8.Machine up chamber is higher and covered by belt no flakes pop out.
Rotor and Screen
The blade of single axis shredder is made of DC53 material, with high wear resistance and durability;Tungsten carbide can be used on the surface of the spindle of the cutter roll of the single axis shredder, which has high wear resistance and durability, and can be repeatedly repaired; the cutter can be used on both sides, and the size of the mesh hole can be adjusted according to the discharge requirements of the user
Bearing block
The special split design ensures that the dust in the tearing chamber will not enter into the bearing. The cylindrical roller self-aligning bearing produced in Luoyang is adopted to ensure that the equipment can adjust the center independently to reduce
the noise when tearing materials.
the noise when tearing materials.
Shock absorbers
1、High efficiency motor star delta start, equipped with hydraulic clutch;
2、Type III reducer - directly connected with knife stick;
3、Reducer damping - protects the power system from damage caused by reduced pressure.
Control Cabinet
The designer has many years of experience in the production and field use of the electric control cabinet. In the design of the electric control cabinet, all possible situations have been taken into account to ensure the advanced and perfect design idea of the system Siemens relay and indicator light imported from Japan are used to ensure stable, safe and reliable operation of the system
Company Profile
Henan Aite Environmental Protection Technology Co.Ltd.is a high-tech enterprise committed to the R &D, manufacturing and sales of mechanical equipment in the environmental protection and recycling industry.
We mainly focuses on design and manufacturing automatic waste segregation machine garbage sorter construction waste sorting equipment. include trammel screen machine, air separation machine, magnetic separators, garbage bag breaking machine, waste shredder machine, manual sorting tables, waste baling machine, chain plate feeder, belt conveyor.etc. Our machine has passed ISO9001:2000, CCC,CE certification.Our machines has already spread over the world.We can provide customers with one-stop service and solutions, complete equipment, on-site installation, and after-sales support.
FAQ
Q1: Are you a factory or a trading company?
A1: We are a professional manufacturer in China, passed Alibaba field certification.
Q2: How long is the warranty period?
A2: Normally 12 months. Except for wearing parts.
Q3: What’s your delivery time??
A3: We will arrange for shipping in factory within 15 working days after receiving the advance payment.
We provide the entire waste sorting line, including factory design, circuit routing, equipment placement, etc. Please feel free to contact us for details. Welcome to factory to discuss business cooperation.
A1: We are a professional manufacturer in China, passed Alibaba field certification.
Q2: How long is the warranty period?
A2: Normally 12 months. Except for wearing parts.
Q3: What’s your delivery time??
A3: We will arrange for shipping in factory within 15 working days after receiving the advance payment.
We provide the entire waste sorting line, including factory design, circuit routing, equipment placement, etc. Please feel free to contact us for details. Welcome to factory to discuss business cooperation.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Zhengzhou Aite Intelligent Technology Co., Ltd.
Location
Room 394, 8th Floor, Block B, Shenglong Youyi City, 89 Science Avenue, Zhengzhou, Henan, China
Contact Person
Liu