25-meter flatbed cable chain tunnel car wash machine 14-brush High Pressure Car Wash Machine
This advanced 25-meter tunnel car wash system features 14 brushes and high-pressure cleaning capabilities, designed for high-volume commercial operations with intelligent automation and comprehensive safety features.
Schneider electrical components with overcurrent, overvoltage, undervoltage, and short circuit protection. All motors feature overload protection with waterproof, anti-corrosion control boxes compliant with IEC and CCC standards.
Economical, standard, and coated wash modes with system background and mobile phone selection switching for differentiated service capabilities.
PLC-controlled system with infrared photoelectric and proximity sensors for automatic vehicle model detection and precise positioning during operation.
Automatic water drainage function with pipeline heating to prevent freezing during low temperatures, ensuring continuous operation.
Comprehensive monitoring with motor overload alarms, emergency stop functions, phase loss alerts, and remote troubleshooting capabilities.
360-degree camera monitoring with intelligent background control and emergency stop/reset functions for maximum operational safety.
| Parameter | Specification |
|---|---|
| Model | S9 |
| Equipment Size | 25m × 4m × 3.5m (L×W×H) |
| Installation Area | 25,000mm × 4,000mm |
| Power Requirements | AC380V 50Hz (5-wire system) |
| Water Requirements | DN25 pipe diameter, flow rate ≥200 L/min |
| Air Source | Pressure 0.75-0.9Mpa, Flow rate ≥ 0.1m³/min |
| Washable Vehicle Size | 5.2m × 2.15m × 2.1m (wheelbase ≤3.2m) |
| Capacity | 50-60 vehicles per hour |
- Small Vertical Brush: 4 pieces
- Large Vertical Brush: 4 pieces
- Top Brush: 1 piece
- Hub Brush: 2 pieces
- Polishing Brush: 3 pieces
- Total: 14 brushes
| Component | Brand/Origin |
|---|---|
| Programmable Controller (PLC) | Mitsubishi, Japan |
| Frequency Transformer | Mitsubishi, Japan |
| Contactor | Schneider LC1-D series, France |
| Photoelectric Sensor | Banner, USA |
| Proximity Transducer | P+F, Germany |
| Three-phase Asynchronous Motor | Siti, Italy |
| High Pressure Water Pump | HP, Italy |
| Resource | Consumption |
|---|---|
| Water | 120 liters per vehicle |
| Electricity | 1.1 kWh per vehicle |
| Shampoo | 20-40ml per vehicle |
| Water-wax | 30ml per vehicle |
- High-pressure Rinsing System: Mobile spray nozzles cover entire vehicle surface, soaking to remove sand and dust before washing
- CNC Metering Pump: Low-level alarm function with chemical replenishment every 200-300 vehicles
- 360-degree Cleaning: No-dead-corner design with soft, non-abrasive imported foam brushes
- Drying System: 6×5.5kW motor fans with polishing brushes for complete drying and finishing
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.