Flatbed cable chain Automated Car Wash Equipment with 14 brushes Auto Car Wash Machine with 6 dyers

Price Negotiable
Price: To be discussed
MOQ: 1
Delivery Time: 25days
Brand: WINTAI
Product Description
Flatbed Cable Chain Automated Car Wash Equipment with 14 Brushes and 6 Dryers
Do you want to have a fully automatic car wash machine that can clean four cars at the same time?
Flatbed Tunnel-Type Car Wash Machine overview
Product Overview
Flatbed Track Tunnel-Type Car Wash Machine with 14 brushes and 25-meter length, designed for high-volume commercial operations.
Technical Specifications
Configuration Specifications
Full Package Name 14-Brush Flatbed Tunnel-type Car Wash Machine
Model S9
Device Size Length × width × height = 25×4×3.5m
Installation Area 25000mm long × 4000mm wide
Power Requirements Voltage: AC380V50Hz (5-wire system)
Water Requirements Pipe diameter DN25, flow rate ≥200 L/min
Air Source Requirement Pressure 0.75~0.9Mpa/ Flow rate ≥ 0.1m³/min
Flatness of the Ground Error ≤ 10mm
Vehicle Washable Model Car, Jeep, van with less than 10 seats
Car Wash Size 5.2m × 2.15m × 2.1m (wheelbase ≤3.2m)
Car Wash Time 50-60 vehicles per hour
Standard Features
  • Hot-dip galvanized external frame
  • Chassis Flushing - One set
  • High pressure preflushing - A set of 140-kilogram pressure motor pumps
  • High bubble Foam - One set
  • Colorful Waterfall - One set
  • Wax spray - One set
  • Air drying system - 6 Fans (4 top fans and 2 side fans)
  • Entry guide platform - One set
  • Frequency conversion speed control - Special thickened bearing, large ball drive chain
Brush Configuration
  • Small vertical brush - 4 pieces
  • Large vertical Brush - 4 pieces
  • Top brush - 1 piece
  • Hub brush - 2 pieces
  • Polishing brush - 3 pieces
Total Equipment Length: 25 meters, including the wheel alignment device
Car wash machine side view Car wash machine interior detail Car wash machine operational view

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Guangzhou Wintai Car Tools Co., Ltd.
Location RM509,GUAN ER YONG TAI BUILDING,NO.812,CONGYUN ROAD, YONGPING STREET,BAIYUN DISTRICT,GUANGZHOU,CHINA
Contact Person Xiang Wen

Request A Quote

Please check your email address.
Your message must be at least 20 characters.