Features:

Looking to pair your RF433 switch with a touch remote control? It's an easy process: just refer to the manual for details.

To begin, wait for the beep - this signals that the switch is ready to learn the signal from the remote control.

Press and hold the switch button for three seconds, then press the remote control to transmit the signal.

You'll receive confirmation in the form of a beep: opening or closing will result in a single beep, while turning the switch "on" will result in two beeps. Turning the switch "off" will result in three beeps, and selecting "remove" will result in four beeps.

For further assistance with your UBARO switch, contact our service mailbox at pingan@ubaro-switch.com.

Technical Parameters:

UBARO provides a remote switch that can be paired with a remote control finger for easy on and off functions. To pair the main switch with the remote control finger, simply press and hold the main switch button for five seconds. When you hear a beep, release your finger and press the button on the remote control. This will allow you to achieve the desired function.

If you need to clear all paired data from your switch, simply press and hold the main switch button until you hear four beeps of 'di', 'di', 'di'. Release your finger and all paired data will be cleared, paving the way for new pairings.

For powering your UBARO switch, it requires a 23A 12V alkaline battery for optimal performance. Please ensure to use the recommended battery type for seamless operations.

If you require any assistance with your UBARO switch, feel free to reach out to our customer service team at Alex@ubaro-switch.com. Our team is dedicated to providing prompt and reliable support to ensure you have the best experience with our product.

Applications:

Installing a Switch

When installing a switch, it is important to follow a few key steps to ensure that the installation is successful and safe.

Step 1: Turn Off Power

Before beginning the installation process, it is important to turn off the power. This will help to prevent any accidents or injuries that can be caused by electrical shock.

Step 2: Proper Connection

To properly connect the switch, make sure that the "L" position is correctly connected to Live Wire. This will ensure that the switch is properly connected to the electrical circuit.

Step 3: Light Bulb Control

The switch is designed to control light bulbs that are located at the "L1", "L2", and "L3" positions. Make sure that these light bulbs are properly installed and connected to the switch.

Step 4: Finalization

To complete the installation process, the cover can be opened and secured in place.

Step 5: Installation Diagram

The figure below provides a schematic diagram of the capacitor installation process. For load bulbs such as halogen lamps, led bulbs, high-voltage strips, smart led bulbs, or bulbs less than 5W, it is necessary to install a yellow safety capacitor. The capacitors are connected in parallel to control the live and neutral wires.

Step 6: Contact Information

If you have any questions or concerns about the installation process, please contact us at the UBARO service mailbox: pingan@ubaro-switch.com

Support and Services:

Our Wireless Remote Switch product comes with comprehensive technical support and services to ensure that you have a smooth and hassle-free experience. Our team of experts is available to assist you with any product-related issues or questions that you may have. We provide troubleshooting assistance, help with product installation and setup, and offer guidance on how to optimize your usage of the Wireless Remote Switch. In addition to technical support, we also offer a range of services to enhance your experience with our product. These include product training, regular firmware updates, and product warranty and repair services. At our company, we are committed to providing our customers with the best possible support and services. We take pride in our reputation for excellent customer service, and we are always here to help you with any product-related needs that you may have.

Packing and Shipping:

Product Packaging:

The Wireless Remote Switch will be packaged in a sturdy cardboard box with the product name and image printed on the front. Inside the box, the switch and remote will be securely wrapped in bubble wrap. A user manual and batteries will also be included.

Shipping:

The Wireless Remote Switch will be shipped via standard ground shipping. Customers can expect to receive their product within 5-7 business days after the order is placed. Shipping fees may apply and will be calculated at checkout.