Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Brand: DEYI

Product Description

Anaerobic Adhesive Red Glue With Low Viscosity

1. Properties

DY-N271 is a single component anaerobic thread locking & sealing adhesive with the features of medium viscosity, and high strength. The product cures in the absence of air between two fitting metal surfaces to prevent loosening and leakage. It is applied to the permanent locking and sealing of the threads below M36, and prevents the rust on threads. It is commonly used for studs, like cylinders head studs.

2. Applications

Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
Spray all threads with enough glue and rotate several times. Allow them to dry. Better effect will be reached at the thickness of 0.05mm.
The bigger gap will affect cure speed and strength, especially for bigger screw threads.

3. Storage and warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing placesã€‚
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

In the event of mass use, make a pre-test.
The adhesive is irritable to skin and eyes. Wear gloves while applying glue.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

4. Parameters

Item	Color	Viscosity(CPS/25â„ƒ)	Filling Gap(mm)	Cure Time(25â„ƒ/100g)
DY-N271	Red	600-1200	0.13	Touch Dry: 5-10mins
				Full cure: 24hrs