30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification
Delivery Time:
Negotiable
Brand:
DEYI
Product Description
30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification Other Adhesives
![]()
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
Technical Parameters
|
Color
|
Viscosity
(CPS/25℃) |
Mixture
|
Work Time(25℃/100g)
|
Cure Time
(25℃/100g) |
Lap Shear Strength
(St-St) |
Heat Resistance
(℃) |
Shelf Life
(25℃) |
|
A:black
|
A:>100000
|
1:1
|
20 Minutes
|
Touch Dry:
30 Mins |
≥16 Mpa
|
-60 to +100
|
12 months
|
|
B:milky white
|
B:>100000
|
|
|
Full Cure:
24 hrs |
|
|
|
Products Description
STORAGE&WARNINGS
Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
DERECTIONS
* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hunan Baxiongdi New Material Co., Ltd.
Location
No. 518, Group 5 Daming Village Daming Industrial Area of Jinxia Economic Development Zone, Changsha, Hunan, 410005, China
Contact Person
SU