3 Hours Curing Time High Temperature Resistance Structural Adhesive 5kg MF C11H12O3 N
- Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
- Remove the cap from the tube and puncture the tubes.
- Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
- Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets. If temperature is below 5℃, it will take a longer time to cure.
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
|
Color |
Cured Color |
Viscosity |
Mixing Ratio |
Work Time(25℃/100g) |
Cure Time |
Lap Shear Strength |
Heat Resistance |
Shelf Life |
|
A:black |
Light Black |
A:>100000 |
1:1 |
5 Minutes |
Touch Dry: |
≥16 MPa |
-60 to +100 |
12 months |
|
B:milky white |
B:>100000 |
Full cure: |
1.Modified-acrylic adhesive
2.Epoxy resin adheisve
3.Silicone sealant
4.Chloroprene Rubber Adhesive
5.UV adhesive
6.Anaerobic adhesive
7.Super Glue
| Packaging | Shipping |
|
A:20g/card 24 cards/inner box 288 cards/ctn DIM:47x46x35cm.
B: 80G/card 12 cards/inner box 144 cards/ctn DIM:68X37X35CM |
1.FOB Terms(FOB GUANGZHOU/SHANGHAI/CHANGSHA) or EX Works. 2.Free sample. 3. 24 hours after-sale service. 4.Customized design and brand is ok. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.