Digester-mounted Double Membrane Biogas Holder

The double membrane biogas holder: digester-mounted double membrane biogas holder
Anaerobic reactor and double membrane biogas holder on the top of the reactor together constitute the combined Gas Production and Gas Storage System.
The integrated biogas device is currently the mainstream mode of construction in European countries with a wealth of successful experience. 98% of the biogas projects built in recent years are heat, electricity and fertilizer cogeneration mode, and the 80% of which adopt integrated anaerobic reactor.

Digester-mounted double membrane biogas holder type

• Shape : Sphere

The membrane structure is put on the top of the tank that biogas storage and output are in the whole structure. The whole structure likes the ball.
Advantages:

• Costs less than Mounted on Surface of land.

• This system can be both regarded as top tap of the tank and the storage system. This saves space and money.

• This is suitable for those projects of daily biogas-output at the middle or below.

• Save space.

• Shape: Conical

The membrane structure is put on the top of the tank that biogas storage and output are in the whole structure. The whole structure presents to be cone-shaped.
Advantages:

• The top tap is cone-shaped, which is good for the melt of snow, and suitable for the raining area.

• Costs less than Mounted on Surface of land.

• This system can be both regarded as top tap of the tank and the storage system. This saves space and money.

• This is suitable for those projects of daily biogas-output at the middle or below.

• Save space.

Making digester-mounted double membrane biogas holder using superior materials and standards.
The digester-mounted double membrane biogas holders are highly tear resistant polyester fabrics with a special PVC surface treatment and acrylate varnish. The fabric is also resistant to the impact of the different biogas ingredients and the white colour of its external membrane has a highly reflective effect. The construction and dimensions of the digester-mounted double membrane biogas holder comply with all relevant standards.

• Biogas storage system fabric is highly flame-poof according to DIN 4102-B1

• Higher specification fabric is available on request

• The special surface treatment formula guarantees high resistance against permeability & UV

• All digester-mounted double membrane biogas holders are resistant to wind and heavy snow and guarantee safe operation

• The temperature resistance ranges from –30°C to +70°C

Pricing of digester-mounted double membrane biogas holder
Pricing varies depending on capacity required, operating pressure and gas production and utilization rates. Quotations are provided within 48 hours of request when accompanied by minimum required specification data.
Minimum specification data required in order to provide a quote:
- Required Gas Storage Capacity (m³)
- Operating Pressure (Kpa or mbar)
- Gas Production & Utilization rates (m³/hr)