ProductDescription

The Lipp Silo forming machine mainly consists of following parts:

(1) Forming machine: making the material bend and initial machine-shaping, meanwhile, it will bend the material to the silo required radius of curvature.

(2) Bending machine: it will roll cooperate with good molding materials bender seaming together

(3) Load bearing support: Given the right diameter of silo. Lifting of the steel silo enclose the top of load bearing support rollers, it can support the spiral rising silo.

(4) Decoiler: Moving steel coils that put on the decoiler, making steel coils can go into forming machine successfully.

(5) Join frame: Joining the load bearing support, locking the required diameter of silo, making the load bearing support stable working.

Technical Datas

(1) Required thickness of raw material for Lipp Silo forming machine:

A. Galvanized steel sheet: 1.5---4.0mm

B. clad steel sheet (bonded SS304 or SS316L to the galvanized steel): 1.5---4.2mm

(2) Raw material width: 495mm

(3) Finished width: 350---370mm

(4) Diameter: 4m——40m

(5) Electrical equipment power: 9x3kw=27kw or 10x3kw=30kw

Our advantages

· A wide range of products we can supply.

· A professional technical team to develop the Lipp Silo forming machine.

· Every Lipp Silo forming machine has been inspected before shipment.