Vertical Planetary Cycloidal Gear Motor Reducer Flange Mounted
| Attribute | Value |
|---|---|
| Gearing Arrangement | Planetary motor |
| Output Torque | 48.3-11920N.M |
| Input Speed | 750-1500rpm |
| Output Speed | 17-136rpm |
| Weight | 40kg |
| Material | Steel or cast iron |
| Port | Shanghai, Ningbo |
| Mounting | Foot mounted, flange mounted |
| Structures | Bearing + Gear + Box |
The cycloid reducer is a novel transmission device that adopts the K-H-V planetary transmission principle with small tooth difference. This precision-engineered system features a double eccentric sleeve with 180-degree dislocation on the input shaft, creating an efficient H mechanism through roller bearings. The cycloidal wheels mesh with needle gears to form a high-performance internal meshing deceleration mechanism.
This reducer is widely used in demanding industrial environments including metallurgy, mining, lifting, transportation, cement production, construction, chemical processing, textile manufacturing, pharmaceuticals, food production, and environmental protection systems. It operates reliably in temperatures ranging from -40℃ to 40℃, with oil temperatures not exceeding 80℃ under normal load conditions.
- Stable operation: Multiple tooth pair contact ensures large coincidence, strong overload capacity, and minimal vibration
- High efficiency: Primary reduction efficiency reaches 94% with reduction ratios from 9-87 (single-stage) up to 5133 (two-stage)
- Durable construction: High-carbon alloy steel components (HRC58-62) with precision grinding ensure long service life
- Low maintenance: Rolling friction design minimizes wear in the meshing area
| Model | Power (KW) | Shaft Diameter (mm) | Center Height (mm) | Mounting Pitch (mm) | Key Size (mm) | Shaft Length (mm) | Shaft to Hole (mm) |
|---|---|---|---|---|---|---|---|
| BWD-B0-0.75 | 0.75 | 30 | 100 | 90*150 | 8 | 35 | 93 |
| BWD-B1-1.1 | 1.1 | 35 | 120 | 110*240 | 10 | 56 | 125 |
| BWD-B1-1.5 | 1.5 | 35 | 120 | 110*240 | 10 | 56 | 125 |
| BWD-B2-2.2 | 2.2 | 45 | 140 | 150*280 | 14 | 68 | 144 |
| BWD-B2-3.0 | 3.0 | 45 | 140 | 150*280 | 14 | 68 | 144 |
| BWD-B3-5.5 | 5.5 | 55 | 160 | 200*340 | 16 | 80 | 149 |
| BWD-B3-7.5 | 7.5 | 55 | 160 | 200*340 | 16 | 80 | 149 |
Important: The horizontal cycloid reducer is normally lubricated by oil pool, with oil level maintained at the middle of the oil window. For harsh conditions or high ambient temperatures, use circulating lubrication.
The reducer ships without lubricating oil. Initial operation requires oil change after 100 hours, followed by regular changes every six months (8-hour work system). More frequent changes may be needed for severe operating conditions.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.