This left-hand (LH) front fog light bracket (part code: MS 22-WDZJ-LH) is exclusively engineered for 2022 and later Tesla Model S vehicles, tailored to the front bumper’s fog light mounting structure post-2022 design updates. Its core function is to serve as a rigid, precise base for the left front fog light: it secures the fog light to the front bumper, maintaining factory-set alignment (ensuring fog light beams are angled correctly for road illumination, no deviation that affects driving safety) and absorbing minor vibration from driving (preventing fog light loosening or lens damage). Additionally, it acts as a buffer for the fog light—during minor front impacts (e.g., scraping branches), it disperses force to avoid direct damage to the fog light assembly.

Crafted from high-strength galvanized steel with a black electrophoretic coating, the bracket balances structural rigidity and corrosion resistance. The galvanized steel base (tensile strength ≥350MPa) resists bending or deformation under the fog light’s weight (≤1.2kg) and long-term vibration; the electrophoretic coating forms a tight protective layer, passing 720-hour salt spray tests (per ASTM B117) to avoid rust from road salt or rain—suitable for coastal, snowy, or high-humidity regions. The black finish also blends with the front bumper’s inner structure, avoiding visual inconsistency when the fog light is installed.

Installation aligns with Tesla’s 2022+ Model S service standards, taking 25–30 minutes with basic tools (10mm socket, trim tool): first, open the frunk and use a trim tool to gently remove the left front bumper inner trim panel (avoid scratching the plastic); locate the old fog light bracket, detach 3 factory bolts (10mm) and 2 plastic clips to remove the old part; clean the mounting surface to remove rust or debris; align the CFN LH bracket with the bumper’s fog light mounting points, secure the bolts to 8±1 Nm (per Tesla torque specs) and snap the clips into place; finally, reinstall the fog light assembly and inner trim panel, then test the fog light to ensure no beam deviation.

After-sales support includes a 4-year warranty (covering manufacturing defects like rusted steel, bent structure, or misaligned bolt holes, excluding damage from collisions or over-tightening bolts) and protective packaging: 1 piece per pack (wrapped in anti-rust film + hard cardboard) to prevent transport scratches. Bulk packs (18 pieces/box) are available for repair shops or Tesla service centers, ensuring consistent quality for every 2022+ Model S LH front fog light replacement. This bracket is a reliable OEM-matching component, guaranteeing both fog light functionality and driving safety.