This right-hand (RH) front fog light bracket (part code: MS 22-WDZJ-RH) is custom-engineered for 2022 and later Tesla Model S vehicles, perfectly matching the post-2022 front bumper’s fog light mounting structure (accounting for the model’s updated front-end design). Its core role is to act as a rigid, precise base for the right front fog light: it secures the fog light firmly to the front bumper, maintaining factory-calibrated alignment (ensuring fog light beams hit the road at the correct angle—no deviation that impairs low-visibility driving safety) and absorbing road vibration (preventing fog light loosening, lens cracking, or wiring damage from long-term shaking). It also serves as a impact buffer: during minor front scrapes (e.g., hitting small obstacles), it disperses force to avoid direct damage to the fog light assembly.

Crafted from high-strength galvanized steel with a black electrophoretic coating, the bracket balances structural stability and corrosion resistance. The galvanized steel base (tensile strength ≥350MPa) withstands the fog light’s weight (≤1.2kg) and resists bending/deformation from vibration; the electrophoretic coating forms a dense protective layer, passing 720-hour salt spray tests (ASTM B117) to avoid rust from road salt, rain, or humidity—ideal for coastal, snowy, or high-moisture regions. The black finish blends seamlessly with the front bumper’s inner components, ensuring no visual inconsistency once the fog light is installed.

Installation follows Tesla’s 2022+ Model S service guidelines, taking 25–30 minutes with basic tools (10mm socket, trim tool): 1. Open the frunk, use a trim tool to gently remove the right front bumper inner trim panel (avoid scratching the plastic); 2. Locate the old RH fog light bracket, detach 3 factory bolts (10mm) and 2 plastic clips to remove the old part; 3. Clean the mounting surface to eliminate rust, dust, or debris; 4. Align the CFN RH bracket with the bumper’s fog light mounting points, tighten bolts to 8±1 Nm (per Tesla torque specs) and snap clips into place; 5. Reinstall the fog light assembly and inner trim panel, then test the fog light to confirm no beam deviation.

After-sales support includes a 4-year warranty (covering manufacturing defects like rusted steel, bent structure, or misaligned bolt holes; excluding collision damage or over-tightening issues) and protective packaging: 1 piece per pack (anti-rust film + hard cardboard wrapping) to prevent transport scratches. Bulk packs (18 pieces/box) are available for repair shops or Tesla service centers, ensuring consistent quality for every 2022+ Model S RH front fog light replacement. This bracket is a reliable OEM-matching component, safeguarding fog light functionality and driving safety.