40kV 4uF Customized Pulse Energy Storage Capacitor for Impulse Discharge Tests | XHCC-4/40G
Within a precisely defined time interval, the XHCC-4/40G customized pulse energy storage capacitor effectively accumulates the charging energy provided by a low-power power supply. At a predetermined moment of need, it swiftly releases that accumulated energy over an exceedingly brief period, forming a robust impact current and a significant amount of power. These characteristics make the capacitor highly valuable in specialised applications, including high-voltage impulse discharge tests, high-energy physics experiments, oscillation circuits and geological prospecting.
How It WorksThe capacitor works in two phases. First, over a precisely defined time interval, it accumulates the charging energy delivered by a low-power power supply. Then, at a predetermined moment of need, it swiftly releases that accumulated energy over an exceedingly brief period, forming a robust impact current and a significant amount of power. It is this controlled accumulation followed by a rapid, concentrated release that suits it to high-voltage impulse discharge tests, high-energy physics experiments, oscillation circuits and geological prospecting.
Ratings at a Glance| Model NO. | XHCC-4/40G |
| Rated Voltage Level | 40 kV |
| Rated Capacitance | 4 µF |
| Capacitance Error | ±5% |
| Ambient Temperature | -20 to +50 ℃ |
| Altitude | ≤ 2000 m (if greater than 2000 m, it is explained separately) |
| Charging Source | Low-power power supply |
| Discharge Characteristic | Swift release over an exceedingly brief period |
| Applications | High-voltage impulse discharge tests, high-energy physics experiments, oscillation circuits, geological prospecting |
1. It is strictly forbidden to hit or collide with the high-voltage pulse capacitor, otherwise the internal film is easily damaged.
2. When using pulse energy storage capacitors, read the instructions and the content of the capacitor label to prevent overvoltage use.
3. During use, pay attention to the withstand voltage and safety distance of the connecting wire.
4. After the test is completed, the high-voltage end must be fully discharged.
5. During use, if there is an abnormal sound inside the capacitor, it is recommended to stop using it, as there is a risk of internal insulation damage.
6. If there are bulges on the capacitor shell, it is recommended to stop using it, as there is a risk of deterioration of the internal material and reduced insulation.
Contact XZH TEST for configuration advice and a quotation on the XHCC-4/40G 40kV 4uF customized pulse energy storage capacitor.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.