Super 48V 8KW To 10KW Pure Sine Solar Inverter For Home Energy Storage System
Product Description
TINKO 48V SPI series is a new type of solar energy storage inverter control inverter integrating solar energy storage & utility charging and energy storage, AC sine wave output. It adopts DSP control and features high response speed, reliability, and industrial standard through an advanced control algorithm.
Product Features
- Supports lead-acid battery and li-ion battery connections.
- With a dual activation function when the li-ion battery is dormant; either mains or photovoltaic power supply access can trigger the activation of the li-ion battery.
- Support three-phase pure sine wave output (350 ~415V).
- Supports phase voltage adjustment in the range of 200, 208, 220, 230, 240Vac.
- Supports two solar inputs and simultaneous tracking of two solar maximum power charging/carrying capacity functions.
- Dual MPPT, efficiency up to 99.9%, single maximum current of 22A, perfectly adapted to high- power modules.
- 4 charging modes are available: solar only, mains priority, solar priority, and mixed mains and PV charging.
- Time-slot charging and discharging setting function is available in both off-grid and hybrid grid-connected modes.
- Stand-alone energy saving mode function to reduce no-load energy losses.
- With two output modes of utility bypass and inverter output, with uninterrupted power supply function.
- LCD large screen dynamic flow diagram design, easy to understand the system data and operation status.
- 360° protection with complete short-circuit protection, over-current protection, overvoltage protection, undervoltage protection, overload protection, etc.
- Support CAN, USB, and RS485 communication.
- With N grounding option.
Product Technical Parameters
| MODEL | SPI-8K-SP | SPI-10K-SP | CAN BE SET |
| INVERTER OUTPUT | |||
| Rated Output Power | 8,000W | 10,000W | |
| Max.Peak Power | 12,000W | 15,000W | |
| Rated Output Voltage | 230Vac(Single phase) | Y | |
| Load Capacity of Motors | 5HP | 6HP | |
| Rated AC Frequency | 50/60Hz | Y | |
| Waveform | Pure Sine Wave | ||
| Switch Time | 10ms(typical) | ||
| Parallel capacity | 1 ~ 6 units | ||
Overload | After triggering the overload protection the inverter will resume output after 3 minutes, 5 consecutive overloads will switch off the output until the inverter is restarted. (102%<load<110%) ±10%: error and output shutdown (110% < load < 125%) ±10%: error and output shutdown Load > 125% ±10%: error reported and output switched off after 5s. | ||
| BATTERY | |||
| Battery Type | Li-ion / Lead-Acid / User Defined | Y | |
| Rated Battery Voltage | 48Vdc | ||
| Voltage Range | 40-60Vdc | Y | |
| Max.MPPT Charging Current | 180A | 200A | Y |
| Max.Mains/Generator Charging Current | 100A | 120A | Y |
| Max.Hybrid Charging Current | 180A | 200A | Y |
| PV INPUT | |||
| Num. of MPP Trackers | 2 | ||
| Max.PV array power | 5500W+5500W | ||
| Max.input current | 22A+22A | ||
| Max.Voltage of Open Circuit | 500Vdc+500Vdc | ||
| MPPT Voltage Range | 125-425Vdc | ||
| MAINS / GENERATOR INPUT | |||
| Input Voltage Range | 90-275Vac | ||
| Frequency Range | 50/60Hz | ||
| Bypass Overload Current | 63A | ||
| EFFICIENCY | |||
| MPPT Tracking Efficiency | 99.9% | ||
| Max. Battery Inverter Efficiency | 92% | ||
| MODEL | SPI-8K-SP | SPI-10K-SP | CAN BE SET |
| GENERAL | |||
| Dimensions | 620*445*130mm(2.03*1.46*0.43ft) | ||
| Weight | 27kg (59.52lb) | ||
| Protection Degree | IP20,Indoor Only | ||
| Operating Temperature Range | -10~55℃, >45℃ derated (14~131℉,>113℉ derated) | ||
| Noise | <60dB | ||
| Cooling Method | Internal Fan | ||
| Warranty | 2 Years | ||
| COMMUNICATION | |||
| Embedded Interfaces | RS485 / CAN / USB / Dry contact | Y | |
| External Modules (Optional) | Wi-Fi / GPRS | Y | |
| CERTIFICATION | |||
| Safety | IEC62109-1, IEC62109-2 | ||
| EMC | EN61000-6-1, EN61000-6-3, FCC 15 class B | ||
| RoHS | Yes | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.