NUP2306EM Cylindrical Roller Bearing 30*72*27mm for Long Lasting Performance
Price:
$6.55/sets 2-49 sets
MOQ:
2 sets
Delivery Time:
Negotiable
Brand:
RHF
Product Description
Product Display
Cylindrical Roller Bearing Features
1. Roller and raceway for line contact or repair line contact, radial bearing capacity is large, suitable for bearing heavy loads and impact loads.
2. Small friction coefficient, suitable for high speed, limit speed close to deep groove ball bearings.
3. N type and nu type can move axially, can adapt to the change of the relative position of the shaft and the housing caused by thermal expansion or installation error, and can be used as a free end support.
4. The processing requirements for the shaft or seat hole are higher, and the relative deviation of the outer ring axis after the bearing installation should be strictly controlled to avoid contact stress concentration.
5. The inner ring or outer ring can be separated for easy installation and disassembly.
1. Roller and raceway for line contact or repair line contact, radial bearing capacity is large, suitable for bearing heavy loads and impact loads.
2. Small friction coefficient, suitable for high speed, limit speed close to deep groove ball bearings.
3. N type and nu type can move axially, can adapt to the change of the relative position of the shaft and the housing caused by thermal expansion or installation error, and can be used as a free end support.
4. The processing requirements for the shaft or seat hole are higher, and the relative deviation of the outer ring axis after the bearing installation should be strictly controlled to avoid contact stress concentration.
5. The inner ring or outer ring can be separated for easy installation and disassembly.
Product Models&Parameters
Bearing Type | Dimension（mm） | Weight(kg) | Bearing Type | Dimension（mm） | Weight(kg) |
NU2206EM | 30*62*20 | 0.26 | NJ2240EM | 200*360*98 | 44 |
NJ2206EM | 30*62*20 | 0.2 | NU2244EN | 220*400*108 | 63.5 |
NU2207EM | 35*72*23 | 0.414 | NJ2244EM | 220*400*108 | 65 |
NJ2207EM | 35*72*23 | 0.414 | NU2306EM | 30*72*27 | 0.538 |
NU2208EM | 40*80*23 | 0.507 | NJ2306EM | 30*72*27 | 0.6 |
NJ2208EM | 40*80*23 | 0.507 | NU2307EM | 35*80*31 | 0.738 |
NU2209EM | 45*85*23 | 0.55 | NJ2307EM | 35*80*31 | 0.84 |
NJ2209EM | 45*85*23 | 0.5 | NU2308EM | 40*90*33 | 0.974 |
NU2210EM | 50*90*23 | 0.59 | NJ2308EM | 40*90*33 | 1.1 |
NJ2210EM | 50*90*23 | 0.59 | NU2309EM | 45*100*36 | 1.34 |
NU2211EM | 55*100*25 | 0.81 | NJ2309EM | 45*100*36 | 1.49 |
NJ2211EM | 55*100*25 | 0.773 | NU2310EM | 50*110*40 | 2.09 |
NU2212EM | 60*110*28 | 1.12 | NJ2310EM | 50*110*40 | 1.85 |
NJ2212EM | 60*110*28 | 1.25 | NU2311EM | 55*120*43 | 2.77 |
NU2213EM | 65*120*31 | 1.48 | NJ2311EM | 55*120*43 | 2.83 |
NJ2213EM | 65*120*31 | 1.63 | NU2312EM | 60*130*46 | 3.38 |
NU2214EM | 70*125*31 | 1.56 | NJ2312EM | 60*130*46 | 3.39 |
NJ2214EM | 740*125*31 | 1.7 | NU2313EM | 65*140*48 | 3.84 |
NU2215EM | 75*130*31 | 1.8 | NJ2313EM | 65*140*48 | 3.69 |
NJ2215EM | 75*130*31 | 1.68 | NU2314EM | 70*150*51 | 4.41 |
NU2216EM | 80*140*33 | 2.2 | NJ2314EM | 70*150*51 | 4.62 |
NJ2216EM | 80*140*33 | 2.36 | NU2315EM | 75*160*55 | 5.58 |
NU2217EM | 85*150*36 | 2.8 | NJ2315EM | 75*160*55 | 6.33 |
NJ2217EM | 85*150*36 | 2.8 | NU2316EM | 80*170*58 | 6.4 |
NU2218EM | 90*160*40 | 3.68 | NJ2316EM | 80*170*58 | 6.59 |
NJ2218EM | 90*160*40 | 3.73 | NU2317EM | 85*180*60 | 8.58 |
NU2219EM | 95*170*43 | 4.97 | NJ2317EM | 85*180*60 | 7.92 |
NJ2219EM | 95*170*43 | 5 | NU2318EM | 90*190*64 | 9.45 |
NU2220EM | 100*180*46 | 5.2 | NJ2318EM | 90*190*64 | 9.55 |
NJ2220EM | 100*180*46 | 5.99 | NU2319EM | 95*200*67 | 10.8 |
NU2222EM | 110*200*53 | 7.63 | NJ2319EM | 95*200*67 | 11 |
NJ2222EM | 110*200*53 | 7.8 | NU2320EM | 100*215*73 | 13.8 |
NU2224EM | 120*215*58 | 9.31 | NJ2320EM | 100*215*73 | 14.3 |
NJ2224EM | 120*215*58 | 9.55 | NU2322EM | 110*240*80 | 19 |
NU2226EM | 130*230*64 | 11.8 | NJ2322EM | 110*240*80 | 19.2 |
NJ2226EM | 130*230*64 | 11.9 | NU2324EM | 120*260*86 | 23.8 |
NU2228EM | 140*250*68 | 15 | NJ2324EM | 120*260*86 | 24.3 |
NJ2228EM | 140*250*68 | 15 | NU2326EM | 130*280*93 | 30 |
NU2230EM | 150*270*73 | 19.6 | NJ2326EM | 130*280*93 | 31.2 |
NJ2230EM | 150*270*73 | 18.1 | NU2328EM | 140*300*102 | 38.1 |
NU2232EM | 160*290*80 | 24.42 | NJ2328EM | 140*300*102 | 37 |
NJ2232EM | 160*290*80 | 24.7 | NU2330EM | 150*320*108 | 45.7 |
NU2234EM | 170*310*86 | 30 | NJ2330EM | 150*320*108 | 46.3 |
NJ2234EM | 170*310*86 | 31 | NU2332EM | 160*340*114 | 55.8 |
NU2236EM | 180*320*86 | 30.8 | NJ2332EM | 160*340*114 | 55.8 |
NJ2236EM | 180*320*86 | 31 | NU2334EM | 170*360*120 | 62.3 |
NU2238EM | 190*340*92 | 38.6 | NJ2334EM | 170*360*120 | 59.9 |
NJ2238EM | 190*340*92 | 40 | NU2336EM | 180*380*126 | 73.9 |
NU2240EM | 200*360*98 | 42.2 | NJ2336EM | 180*380*126 | 77.9 |
Cage Type：ECM(EM)/ ECP/ ECJ/ ECML | ||||||||
N type:
The inner ring has two integral flanges and the outer ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings.
NU type:
NJ type:
The outer ring has two integral flanges and the inner ring one integral flange. The bearings are therefore suitable for the axial location of a shaft in one direction.
NF type:
The outer ring has one integral flange and the inner ring two integral flanges.
NUP type:
The outer ring has two integral flanges and the inner ring one integral flange and one non-integral flange in the form of a loose flange ring. The bearings can be used as locating bearings, i.e. they can provide axial location for a shaft in both directions.
RN type:
No outer ring and the inner ring two integral flanges.
NN type:
NN type bearing without ribs on outer ring,there is a wall in the midel of between both sides of inner ring. It can make shaft
relative bearing between the axial displacement generated in both directions.
The inner ring has two integral flanges and the outer ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings.
NU type:
The outer ring has two integral flanges and the inner ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings.
NJ type:
The outer ring has two integral flanges and the inner ring one integral flange. The bearings are therefore suitable for the axial location of a shaft in one direction.
NF type:
The outer ring has one integral flange and the inner ring two integral flanges.
NUP type:
The outer ring has two integral flanges and the inner ring one integral flange and one non-integral flange in the form of a loose flange ring. The bearings can be used as locating bearings, i.e. they can provide axial location for a shaft in both directions.
RN type:
No outer ring and the inner ring two integral flanges.
NN type:
NN type bearing without ribs on outer ring,there is a wall in the midel of between both sides of inner ring. It can make shaft
relative bearing between the axial displacement generated in both directions.
FAQ
FAQ Q:Are you trading company or manufacturer? --We are the company dealing in trading business and manufacturing business. Q:What’s the MOQ? --There is no MOQ for sample orders. It's generally 300pcs for custom products and can be negotiated according to the unit price of the product. Q:How long is the lead time? --Generally, the lead time for sample orders is 1-3 days, for bulk orders is in 3-15 days. It’s depends on the quantity of the order. Q:Do you offer free samples? --If you place an order, we can return part of sample fee even all of fee to you. It also depends on the quantity of order and the type of sample. And you just need to pay freight. Q: Could you customized for me? --Sure,we can supply OEM service as per your drawing or samples.
FAQ Q:Are you trading company or manufacturer? --We are the company dealing in trading business and manufacturing business. Q:What’s the MOQ? --There is no MOQ for sample orders. It's generally 300pcs for custom products and can be negotiated according to the unit price of the product. Q:How long is the lead time? --Generally, the lead time for sample orders is 1-3 days, for bulk orders is in 3-15 days. It’s depends on the quantity of the order. Q:Do you offer free samples? --If you place an order, we can return part of sample fee even all of fee to you. It also depends on the quantity of order and the type of sample. And you just need to pay freight. Q: Could you customized for me? --Sure,we can supply OEM service as per your drawing or samples.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Qingdao Haver Seiko Bearing Co., Ltd.
Location
No. A6 Shengao Hardware City,xiucheng Road, Qingdao, Shandong, China
Contact Person
Wang