Each Configuration Capable Of Various Voltage-to-wattage Combinations PFA Immersion Tank Heaters

Key Features and Benefits of PFA Immersion Tank Heaters:
Chemical Resistance:
PFA is known for its excellent chemical resistance to most aqueous solutions, including acids, bases, and plating solutions.
High Purity:
Ultrapure PFA surfaces ensure the heater does not contaminate the heated fluid, making it suitable for applications like DI water heating.
Self-Regulating:
Some models use self-regulating technology, preventing overheating and ensuring uniform heating.
Compact Design:
These heaters are designed to be compact and efficient, fitting well into process tanks.
Various Sizes and Power Options:
They are available in different sizes and power outputs, allowing for customization to suit specific needs.
Reliable Heating:
They can reliably heat a wide range of chemicals and DI water to constant temperatures.
Safety Features:
Some models have safety features like thermal overload protection

Specifications

 

Heater Element	Heating Coil
Wetted Surfaces	PFA/PTFE
Wattages	1.0 – 20 kW
Voltages	120 – 480 VAC 1 or 3 phase
Sizes (LxW)	7x5 to 19x14 inch
Height	1-5/8 inch
Temperature	200°C (392°F)
Hi-Limit Sensor	Type-J thermocouple
Ground Wire	Encapsulated
Lead Wire	15-ft

 

 

 

Dimensions

Model	kW	Height	Benefits
Grid	1-6 kW*	3/4 in	Low Profile Design
Frame	1-30 kW	1-1/2 in	Low Profile Design for Higher kW's
Fence	1-10 kW	Variable	Heater on side of tank leaving center of tank open

 

 

Industries

• Semiconductor Fabrication
• Solar Cell Manufacturing
• Flat-Panel Display, LEDs & Electronics
• Chemicals Manufacturing
• Industrial Manufacturing

 

Other Applications

 

Electrochemical Deposition

Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.

 

Electrochemical Deposition Products(1)
B SERIES – SMALL TANK Small metal over the side heater. Excellent for laboratory and small tank applications. Heats up to 300°F (149°C). Single phase. 500-1500 watts, 120-240 volts..	3HS SERIES – TUBULAR Over the side, 3 element, tubular heater. Three phase. Three phase. 3000-10500 watts, 208-600 volts.	MOTS SINGLE – DERATED Derated, low watt density, metal over the side heater. Single or three phase. 500-6000 watts, 120-600 volts.
HXF SERIES Low-watt density, spiral heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 500-6000 watts, 120-600 Volts.	FLS SERIES FLANGE HEATER Metal flanged heater, 3″, 5″ and 6″ flange sizes. 3000-72000 watts, 208-600 volts.	U SERIES COIL Metal Immersion Coil in U shape for chemical heating or cooling requiring minimal recovery time. Available in steel, 316 stainless steel and titanium.