7 X 7 In 3KW 240VAC 1 Phase PFA Industrial Immersion Heaters For Quartz Tanks
7 x 7 In 3KW 240VAC 1 Phase PFA Immersion Tank Heaters For Quartz Wet Process Tanks
PFA immersion tank heaters are designed for heating fluids in tanks, especially corrosive chemicals or ultrapure water, where the chemical resistance of PFA (Perfluoroalkoxy) is essential. These heaters have PFA-coated or PFA-made wetted surfaces, making them compatible with a wide range of chemicals. They are often used in industries like semiconductor, solar, and MEMs where high purity and chemical resistance are crucial.
Specifications
| Heater Element | Heating Coil |
|---|---|
| Wetted Surfaces | PFA/PTFE |
| Wattages | 1.0 – 20 kW |
| Voltages | 120 – 480 VAC 1 or 3 phase |
| Sizes (LxW) | 7x5 to 19x14 inch |
| Height | 1-5/8 inch |
| Temperature | 200°C (392°F) |
| Hi-Limit Sensor | Type-J thermocouple |
| Ground Wire | Encapsulated |
| Lead Wire | 15-ft |
Dimensions
|
Model
|
kW
|
Height
|
Benefits
|
|---|---|---|---|
|
Grid
|
1-6 kW*
|
3/4 in
|
Low Profile Design
|
|
Frame
|
1-30 kW
|
1-1/2 in
|
Low Profile Design for Higher kW's
|
|
Fence
|
1-10 kW
|
Variable
|
Heater on side of tank leaving center of tank open
|
Industries
- Semiconductor Fabrication
- Solar Cell Manufacturing
- Flat-Panel Display, LEDs & Electronics
- Chemicals Manufacturing
- Industrial Manufacturing
Other Applications
Ultra-High-Purity Heating
Designed with Ultra-High-Purity processes in mind, Surplus delivers clean-room assembled, reliable heating and power solutions to fit specific needs.
Products For Ultra-High-Purity Heating |
||
|
Inline Heater
|
PFA Inline Heater
|
Inline Chemical Heater
|
Flammable Solvent Heating
Products designed to safely heat IPA and low flash-point solvents, meeting the most stringent cleanliness requirements to support next-generation semiconductor node technologies.
Products For Flammable Solvent Heating |
||
PFA Inline Chemical Heater |
PTFE Inline Chemical Heater
|
Inline Chemical Heater
|
Electrochemical Deposition
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
|
Electrochemical Deposition Products(2) |
||
|
MOTS TRIPLE – VERTICAL .
|
9HS SERIES – TUBULAR
|
V SERIES – VARIPOWER
|
|
MOTS SINGLE
|
MOTS SINGLE – DAS, PHOSPHATE MOTS Single DAS Phosphate Heater – Top Portable Electric Immersion Heaters: Phosphate, metal over the side heater. Single or three phase. 1000-10000 watts, 120-600 volts.  |
MOTS TRIPLE – L SHAPED, DERATED
|
Anodizing
Anodizing is an electrochemical process of converting a metal surface into an oxide layer. Mainly aluminum is used for anodizing, although other nonferrous metals, such as titanium and magnesium, can also be anodized. The metal part is connected as the anode and immersed into an acid electrolyte bath, where an electric current is applied to grow the oxide layer from the piece. The resulting surface finish will provide functional properties as corrosion-resistance and durability, as well as decorative properties. Surplus heaters provide beautiful, precise finishes. Surplus power supplies deliver high current, high accuracy, and high energy efficiency to meet a modern anodizing process's requirements.
Products For Anodizing |
||
|
MOTS SINGLE – BOTTOM, DERATED .
|
MOTS TRIPLE – L SHAPED
|
6HS SERIES – TUBULAR
|
|
MOTS TRIPLE – DEEP TANK
|
MOTS TRIPLE – DEEP TANK Deep tank, metal over the side heater. Three phase. Heats up to 300°F (149°C). Single or three phase. 18000-54000 watts, 208-600 volts.  |
G (GRID) SERIES COIL
|
| 9HX SERIES Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts.  |
6HX SERIES Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts.  |
3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . 3000-18000 watts, 208-480 volts.
|
| HXF SERIES Low-watt density, spiral heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 500-6000 watts, 120-600 Volts.  |
HX SERIES Low watt density, spiral. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . Single phase. 500-9000 watts, 120-600 volts.  |
3HX SERIES
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.