Excellent chemical compatibility and rugged design for your heating or cooling application.

FEATURES

All wetted parts of fluoropolymer (FEP, PFA, or PTFE) construction.

Heavy duty CPVC mounting bracket and 1/8-inch thick perforated guard helps protect the coil from damage.

Heavy wall tubing improves circulation and minimizes pressure drop.

SPECIFICATIONS

Standard coils are FEP and rated up to 60 PSI steam service. PFA coils are available for steam service up to 140 PSI.

5.5 square foot to 120 square foot of exchange area standard.

20 PSI minimum steam pressure required for operation.

Tubing sizes: 1/2 inch (12.5mm) diameter for larger coils and 1/4 inch (6.5mm) diameter for smaller coils.

Inlet and Outlet Sizing:3/4'', 1'', 1-1/2'', 2'' Available

OPTIONS AVAILABLE (CONSULT FACTORY)

Custom configuration including bottom style exchangers.

Anti-floatation brackets.

Special manifold configurations.

Dual coils for both heating and cooling.

NOTE: Vacuum breakers recommended for fluoropolymer heat exchanger steam heating installations.

Custom exchange area and size are available

Industries

• Semiconductor Fabrication
• Solar Cell Manufacturing
• Flat-Panel Display, LEDs & Electronics
• Chemicals Manufacturing
• Industrial Manufacturing

Other Applications

Acid Heating And Corrosive Chemical Heating

Built to withstand the stress of acids or other corrosive chemicals while maintaining the highest quality and safety standards, Process Technology fluoropolymer (PTFE) heaters and exchangers are engineered to perform.

Acid Heating And Corrosive Chemical Heating(1)
3HX Series	HXT SERIES – SCREWPLUG	9HX SERIES
6HX SERIES	3HXOL SERIES	HXSL SERIES

Electrochemical Deposition

Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.

Electrochemical Deposition Products(2)
MOTS SINGLE – BOTTOM, DERATED Derated, low watt density, L-shaped, bottom, metal over the side Immersion Heater. Single or Three phase. Three phase. 500-6000 watts, 120-480 volts. .	MOTS TRIPLE – L SHAPED L-shaped, bottom style metal over the side heater. Three phase. Single or three phase. 3000-36000 watts, 200-600 volts.	6HS SERIES – TUBULAR Over the side, 6 element, tubular heater. Three phase. 6000-21000 watts, 208-600 volts.
MOTS TRIPLE – DEEP TANK Deep tank, metal over the side heater. Three phase. Heats up to 300°F (149°C). Single or three phase. 18000-54000 watts, 208-600 volts.	MOTS TRIPLE – DEEP TANK Deep tank, metal over the side heater. Three phase. Heats up to 300°F (149°C). Single or three phase. 18000-54000 watts, 208-600 volts.	MOTS TRIPLE Metal over the side heater. Three phase. 3000-36000 watts. 208-600 volts.