PTFE Welding Tank Corrosion Resistant Pickling Tank for Wet Processing
Non-standard Size PTFE Welding Tank PTFE Corrosion-Resistant Pickling Tank Wet Process Tanks
Overview
Surplus designed process and rinse tanks are constructed from a single sheet of application specific plastic material that is CNC machined and then folded into the form of your tank using the “ORIGAMI” method. Welded corners can create particle/contamination traps and can leak due to workmanship, thermal cycling, and/ or prolonged chemical exposure. However, the “ORIGAMI” method minimizes welding and provides smooth, seamless, rounded interior corners.
The “ORIGAMI” design and fabrication approach combined with over 40 years of wet process experience provides optimum process and rinse results at the lowest possible cost.
Custom PTFE Tank High temperature PTFE Groove Chemical Resistance PTFE Container Integrated Welding Plastic Tank Features:
Custom-mode product to be manufactured by our experienced welders to the
satisfaction of the customer. The maximum size we delivered is 2.0 m × 2.5 m × 2.0 m.
Custom PTFE Tank High temperature PTFE Groove Chemical Resistance PTFE Container Integrated Welding Plastic Tank Main applications:
• Washing tank (Silicon wafer etc.)
• Washing tank for temperature control
• Storage of chemical
Custom PTFE Tank High temperature PTFE Groove Chemical Resistance PTFE Container Integrated Welding Plastic Tank Characteristics:
• The mold is not required, and is economical for smaller lots.
• Free designs are possible to meet various needs.
Specifications
|
Products
|
PTFE Machine
|
Color
|
White, Colorful
|
|
Temperature
|
-200~+260℃
|
Calibre
|
6-1300mm
|
|
Material
|
PTFE
|
Height
|
35-1000mm
|
|
Brand Name
|
Conceptfe
|
Density: 2.3g/cm³
|
|
|
Features
|
Low temperature and high temperature resistance( -200+260℃)Corrosion resistance, whether resistance
High lubricity, no adhesion Non-flammable Non-toxic Acid and alkali resistance(except molten alkali metals) Antioxidant |
||
Industries
- Semiconductor Fabrication
- Solar Cell Manufacturing
- Flat-Panel Display, LEDs & Electronics
- Chemicals Manufacturing
- Industrial Manufacturing
Other Applications
Surface Preparation
Most surfaces must be prepared or prepped before plating. The Surface Preparation step often includes cleaning, sanitization, or electropolishing.
Products For Surface Preparation |
||
|
MOTS SINGLE – BOTTOM, DERATED .
|
MOTS TRIPLE – L SHAPED
|
6HS SERIES – TUBULAR
|
| 9HX SERIES Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts.  |
6HX SERIES Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts.  |
3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . 3000-18000 watts, 208-480 volts.
|
| HXF SERIES Low-watt density, spiral heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 500-6000 watts, 120-600 Volts.  |
HX SERIES Low watt density, spiral. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . Single phase. 500-9000 watts, 120-600 volts.  |
QM SERIES HEATER ELEMENT Metal Element (QM part 1). Single phase. Heats up to 212°F (100°C). 500-10000 watts, 120-600 volts.  |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.