3 Phase PTFE Immersion Heaters Over the Side for Semiconductor Wafer Cleaning
3HX Series 3 Phase Over the Side Three-Element PTFE Immersion Heaters
PTFE HEATERS:
Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).
Excellent chemical resistance to aggressive acids.
PTFE Immersion Heater For Corrosive Chemical Heating FEATURES
· PTFE sleeved 304 stainless elements inert to most solutions up to 212°F (100°C).
· Low watt density design 10 watts/square inch (1.5w/cm²).
· Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.
· Certification: ISO9001,CE
SPECIFICATIONS
· 500 - 9000 watts
· 120 to 600 volts (600 volts on 4500 watts or lower only)
OPTIONS AVAILABLE (CONSULT FACTORY)
· Resettable thermal protectors
· Polypropylene guards (sold separately)
· Custom configurations and lengths
· Custom wire and conduit lengths
Others Applications
Point Of Use Heating
Point of Use (POU) Heating refers to the energy-efficient heating method of placing a small heater near the processing bath to reduce heat-up wait times.
Products For Point Of Use HeatingApplications
|
||
|
High-Purity PFA Inline Chemical Heater  |
PTFE Inline Heater
|
Inline Chemical Heater
|
RO/DI Water Heating
Deionized water (DI Water) has become a crucial part of many industrial process applications' impurity removal process. Cleaning semiconductors or other ultra-clean end-use devices requires the highest level of purity to reduce product failure.
Products For RO/DI Water Heating
Applications
|
|
|
Heating Systems for Purified, DI Water
|
PTFE Inline Chemical Heater
|
Electro-Polishing
Electro-polishing (Electropolishing) involves using electricity and chemical reactions to remove ions from the surface to deburr and reduce the surface roughness for a smooth, level, and clean surface, free of irregularities. Surplus power supplies deliver full power supply output performance, high efficiency, high-speed, DC output, connectivity, reliability, and ETL certification.
Products For Electro-Polishing |
||
| 9HX SERIES Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts.  |
6HX SERIES Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts.  |
3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . 3000-18000 watts, 208-480 volts.
|
| HXF SERIES Low-watt density, spiral heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 500-6000 watts, 120-600 Volts.  |
HX SERIES Low watt density, spiral. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . Single phase. 500-9000 watts, 120-600 volts.  |
3HX SERIES
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.