480V 3P 3KW 610MM Fluoropolymer Immersion Heater Six Element Over the Side
480V 3P 3KW 610MM Fluoropolymer PTFE Six Element Over the Side Immersion Heater
PRODUCT DESCRIPTION
Excellent chemical resistance to aggressive acids.
-
FEATURES
-
PTFE sleeved 304 stainless elements inert to most solutions up to 212°F (100°C).
-
Low watt density design 10 watts/square inch (1.5w/cm²).
-
Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.
-
Grounded internal metal element and built in thermal protector. Replaceable P1 protector standard for solutions up to 180°F(82°C).
-
Certification: cULus. CE certified and CSA
-
-
SPECIFICATIONS
-
3000 - 18000 watts
-
120 to 600 volts (600 volts on 12,000 watts or lower only)
-
-
OPTIONS AVAILABLE (CONSULT FACTORY)
-
Resettable thermal protectors
-
Polypropylene guards (sold separately)
-
Custom configurations and lengths
-
Custom wire and conduit lengths
-
Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).
-
OPTIONS AVAILABLE (CONSULT FACTORY)
-
Resettable thermal protectors
-
Polypropylene guards (sold separately)
-
Custom configurations and lengths
-
Custom wire and conduit lengths
-
-
Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).
Others Applications
Acid Heating And Corrosive Chemical Heating
Built to withstand the stress of acids or other corrosive chemicals while maintaining the highest quality and safety standards, Process Technology fluoropolymer (PTFE) heaters and exchangers are engineered to perform.
| Acid Heating And Corrosive Chemical Heating(1) | ||
3HX Series |
HXT SERIES – SCREWPLUG
|
9HX SERIES
|
|
6HX SERIES
|
3HXOL SERIES  |
HXSL SERIES
|
Electrochemical Deposition
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
|
Electrochemical Deposition Products(2) |
||
|
MOTS TRIPLE – VERTICAL .
|
9HS SERIES – TUBULAR
|
V SERIES – VARIPOWER
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.