Waterproof Through-Type Junction Box - 1 In 2 Out Cable Gland Connector
Connection Type: Screw-Type
Type: 1-in-2-out
Material: Plastic
Applicable Wire Gauge: 0.5mm²-6mm²
Outer Diameter (OD): 3*M20:5-9mm 9-12mm,2*M25:5-9mm 9-12mm 10-14mm
P/N : CB-2068S-3T
| Parameter | Specification |
|---|---|
| Product Name | 2T/3T/4TA/4TB/5T/6T Junction Box |
| Wiring Range | 0.5 - 6 mm² |
| Rated Current | 40A |
| Operating Voltage | 450V |
| Ingress Protection (IP) Rating | IP68 |
| Ambient Temperature | -40℃ ~ +105℃ |
| Cable Diameter (OD) | 5 - 9 mm, 9 - 12 mm,10-14mm |
| Connector Size | 2*M25/1*M20,2*M25/2*M20,2*M25/3*M20,2*M25/4*M20,2*M25 |
-
1. Uncompromising IP68 Environmental Sealing
Delivers superior IP68-rated protection, ensuring a completely waterproof and dust-tight seal. It reliably safeguards electrical connections against harsh elements like heavy rain, moisture, high-pressure washdowns, and dusty conditions, guaranteeing operational integrity outdoors or in demanding industrial settings.
-
2. Efficient & Organized Cable Management
The through-type design with integrated cable glands streamlines installation by allowing cables to pass directly through the enclosure. This 1-in-2-out configuration efficiently splits a single source to two devices, significantly reducing cable clutter and simplifying system layout for a cleaner, more professional installation.
-
3. Robust Construction for Long-Term Durability
Engineered from high-grade, UV-resistant materials such as polycarbonate (PC) or nylon, the box offers exceptional resistance to impact, corrosion, chemical exposure, and temperature fluctuations. This robust build ensures a long service life and reduces maintenance needs and replacement costs.
-
4. Quick, Tool-Free Installation & Maintenance
Designed for ease of use, the enclosure often features a tool-free or minimal-tool access design. This allows for rapid wiring, future expansions, or straightforward maintenance, saving valuable time and labor costs during both initial setup and throughout the product's lifecycle.
A: This junction box is rated IP68. This is the highest level of ingress protection, meaning it is completely dust-tight (6) and can withstand continuous immersion in water beyond 1 meter depth (8). It is perfectly suited for permanent outdoor use, harsh environments, and applications where it might be exposed to heavy rain, flooding, or high-pressure washing.
A: The specific range depends on the model, but standard glands for a box of this size typically accommodate cables between 3mm to 8mm in outer diameter. It is crucial to check the product specifications for the exact range to ensure a tight and secure seal for your specific cables.
A: The enclosure is constructed from high-quality engineering plastics, such as Polycarbonate (PC) or Nylon (PA66). These materials are specifically chosen for their excellent resistance to impact, corrosion, chemicals, and most importantly, UV radiation, preventing brittleness and degradation over time when used outdoors.
A: This varies by specific product listing. Some models are supplied as an empty enclosure, giving you the flexibility to use your own preferred connection method (e.g., Wago connectors, soldering, or wire nuts). Other models may come pre-installed with DIN-style terminal blocks for easy and secure screw-down connections. Please verify the product description for configuration details.
A: This junction box is designed for general-purpose low-voltage and mains voltage applications. Common ratings are up to 250V AC and 15-20A per circuit. However, you must always confirm the exact ratings in the product's technical specifications to ensure it is suitable and safe for your intended electrical load.
A: To maintain the IP68 rating:
- Ensure the integrated silicone rubber gasket is clean, undamaged, and properly seated in its groove.
- Evenly tighten all the stainless steel closure screws to compress the gasket uniformly.
- Use the cable glands correctly: select the right gland size for your cable diameter, and hand-tighten the gland nut firmly to compress the internal seal onto the cable jacket.
- Avoid over-tightening, as this can damage the threads or the gasket.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.