aluminium 6063 cnc manufacture medical part lathe Finished Prototypes
| Attribute | Value |
|---|---|
| Product name | Aluminium 6063 Cnc Manufacture Medical Part Lathe Finished Prototypes |
| Material | Aluminum Alloy, AL2024, AL5052, AL6061, AL6063, AL7050, and AL7075 |
| Place of Origin | China |
| Surface Treatment | Anodizing, chrome As Your Request |
| Lead Time | 1-2 weeks for sample, 2-5 weeks for bulk order |
| Sample | Need to pay sample fee |
| Color | Customized Color |
As far as the aluminum alloy itself is concerned, in addition to the chemical composition, the greater influence on the quality of anodic oxidation is the organizational structure. And the organizational structure is determined by the process, so from casting to processing molding the entire production process must consider the quality requirements of the product surface.
Metallurgical changes in the process of casting and homogenization:
Melting Casting: Aluminum in the casting process forms a dendritic structure, the size of the dendrite depends on the solidification rate. Cooling is too fast to form fine columnar crystals, near the ingot surface there is usually a layer of columnar crystals edge area, from the crystallizer wall to the ingot internal growth of coarse dendrites. Coarse dendrites from the ingot leave streaks on the profile during extrusion. This means that structural differences due to different solidification speeds cannot be completely eliminated in subsequent processing. Therefore, the casting process should take into account the structural homogeneity of the ingot cross-section, and for this reason, hot-top casting and electromagnetic casting have been developed.
Aluminum forms a dendritic structure during the casting process, and the size of the dendrites depends on the solidification rate. Fine columnar crystals are formed when cooling is too fast, and there is usually a layer of columnar crystals near the surface of the ingot in the edge region, and coarse dendrites grow from the crystallizer wall towards the inside of the ingot. Coarse dendrites from the ingot leave streaks on the profile during extrusion. This means that structural differences due to different solidification speeds cannot be completely eliminated in subsequent processing. Therefore, the casting process should take into account the structural homogeneity of the ingot cross-section, and for this reason, hot-top casting and electromagnetic casting have been developed.
| Product | Material | Color | Surface treatment |
|---|---|---|---|
| Aluminium Extrusion Parts | AL2024, AL5052, AL6061, AL6063, AL7050, and AL7075 | Green, Grey, Black, White, (RAL series) etc. | Mill finish, anodized, electrophoretic coating, powder coating, thermal break, wood grain/wood-in-shift, etc. |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
| 6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
Any customization can be made to meet the specific needs of medical equipment and infrastructure. Its adaptability facilitates the development of components that can withstand the demanding environments of hospitals and clinics, including exposure to chemicals and continuous use.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.