High-Efficiency and Eco-Friendly Chemical Cleaning Line for and Environmentally Friendly Industrial Cleaning Solutions
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
High-Efficiency and Eco-Friendly Chemical Cleaning Line
Equipment Description
I. Working Principle
- Cavitation Effect: Ultrasound generates high-frequency vibrations in the cleaning fluid, forming microbubbles that burst instantly, releasing shock waves that remove oil, rust, and particulate matter.
- Low frequencies (16-25kHz) are suitable for heavy oil stains, while high frequencies (26-40kHz) are suitable for cleaning blind holes on precision parts.
- Chemical Synergy: Neutral, environmentally friendly cleaning agents work together with ultrasound to accelerate stain removal, especially effective on polishing wax and cutting fluid residue on hardware.
II. Typical Process Flow
- Pretreatment Stage: Hardware is manually or robotically loaded into the cleaning basket → soaked for pre-degreasing (optional).
- Cleaning Stage: Rough cleaning → High-pressure rinsing → Pure water rinsing, all with ultrasonic assistance.
- Post-treatment Stage: Hot air drying (60-80°C) → Rust prevention treatment → Automatic discharge.
III. Equipment Features
- High-Efficiency Cleaning: A single cleaning cycle takes 10-30 minutes, 5-8 times more efficient than traditional manual cleaning.
- Environmentally Friendly and Energy-Saving: The circulating cleaning system reduces water consumption by 30%, and the neutral cleaning agent meets environmental standards.
- Intelligent Control: PLC + touch screen control allows programmable temperature, time, and operation flow, and supports fault self-diagnosis.
- Highly Adaptable: It can handle a variety of materials, including metal stampings, die-castings, and bearings, and is compatible with workpieces up to 20 kg.
IV. Installation and Operation Guidelines
- Environmental Requirements: Place horizontally in a well-ventilated area. Power supply: 220V/50Hz, grounded. Ambient temperature: 10-40°C.
- Operating Instructions: The liquid level in the tank must cover the transducer. Do not operate the ultrasonic or heating functions without a load. Turn off the power before any sudden shutdown.
- Maintenance Recommendations: Clean impurities from the tank bottom daily, test transducer performance monthly, and replace the circulating filter quarterly.
Safety Warnings: Do not clean flammable or explosive items. Wear goggles and gloves when operating. Immediately stop and inspect any abnormal noise.
Main Structures and Components
I. Core Functional Components
- Ultrasonic Generator: As the core drive unit of the device, it converts electrical energy into a high-frequency electrical signal (20-40kHz). The output power is adjusted through an oscillator and power amplifier to suit different cleaning scenarios.
- Ultrasonic Transducer: Composed of piezoelectric ceramic material, it converts the electrical signal output by the generator into high-frequency mechanical vibrations.
- Cleaning Tank: Made of 304 stainless steel, corrosion-resistant and load-bearing, with a thickness of 1.5-2.5mm. Customizable specifications (e.g., standard inner tank dimensions of 800×530×250mm).
II. Auxiliary Function Modules
- Mechanical Transmission System: Rotary throwing mechanism drives the basket to rotate via a motor, solving the problem of blind spots in blind holes.
- Temperature Control System: Built-in 6000W heating element and temperature sensor enable precise temperature control from room temperature to 110°C.
- Circulating Filtration System: Equipped with a multi-layer filter and circulating pump, extending the life of the cleaning fluid and reducing wastewater discharge by over 30%.
III. Intelligent Control Unit
- PLC + Touchscreen Control Interface: Programmable parameters such as cleaning time, temperature, and throwing frequency.
- Safety Protection Module: Includes liquid level sensor, overheat protection, and emergency shutdown functions.
IV. Typical Structural Layout Example (Split-Type Equipment)
- Upper Module: Cleaning Tank (Built-in Displacer) → Heating System → Rotary Throwing Mechanism
- Lower Module: Ultrasonic Generator → Circulating Filtration Device → PLC Control Cabinet
- External Components: Robotic Handling System → Wastewater Recovery Tank
Key Features
- High Cost Performance: Achieves the best cost performance based on customer's product positioning and development strategy.
- Advanced Design: Meticulous design concept along with highly automated industrial equipment showcases modern enterprise image.
- High Adaptability: Meets current production requirements while allowing for future increased production and improved quality.
- Quality Compliance: Strictly adheres to ISO900 quality management system with rigorous control of all installation details.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Zhejiang Huier Coating Environmental Protection Equipment Co., Ltd
Location
Room 801, Building 1, No.10 Keyuan Road, Wuyang Street, Deqing County, Huzhou City, Zhejiang Province
Contact Person
Chen Xianzhong