380207192602500514 Mud Pump Pressure Gauge BOMCO YK-150 Mud Pressure Gauge

How to install the Mud Pump Pressure Gauge BOMCO YK-150 for mud pump?

A Mud Pump Pressure Gauge BOMCO YK-150 should be installed on the pump discharge, and a high-low pressure alarm system should be utilized to address problem conditions that could lead to pump failure.

It is recommended that a pressure gauge be installed at the pump suction, and a lowsuction pressure alarm be mounted in the suction line.

However, do not install any metering device that causes a flow restriction on the suction piping. For full operating instructions and guidelines for this equipment, see the documentation provided by the manufacturer.

Ensure a Mud Pump Pressure Gauge BOMCO YK-150 is installed at the suction point, preferably with a thermometer and a low-pressure alarm.

Check the Mud Pump Pressure Gauge BOMCO YK-150 on the external lube oil filter (if utilized). If the differential between the gauges is greater than 15 psi when the pump is at operating temperature, clean the strainer and strainer magnets.