Solar Lithium Cell 802040 3.7V 650mAh Rechargeable Lithium Ion Polymer Battery For Bauty Device
| Attribute | Value |
|---|---|
| Nominal Capacity | 650mAh |
| Charging Current | 0.2c |
| Continuous Discharging Current | 0.5c |
| Max Discharging Current | 1c |
| Weight | 10g |
| Cycle Life | 500 cycles |
| Warranty | 12 months |
| Shipping | UPS, DHL, FedEx, TNT, by Air, by Sea, Special Line |
| Connector | Jst, Molex |
| Specification | 8×20×40mm |
| No. | Items | Specifications |
|---|---|---|
| 1 | Batteries | 3.7V 650mAh LiPo battery |
| 2 | Charge voltage | 4.2V |
| 3 | Nominal voltage | 3.7V |
| 4 | Nominal capacity | 650mAh @ 0.2C Discharge |
| 5 | Charge current | Standard Charging: 0.5C Rapid charge: 1.0C |
| 6 | Standard Charging method | 0.5C CC charge to 4.2V, then CV charge till current ≤0.05C |
| 7 | Charging time | Standard: 2.75 hours (Ref.) Rapid: 2 hours (Ref.) |
| 8 | Max. charge current | 1.0C |
| 9 | Max. discharge current | 1.0C |
| 10 | Discharge cut-off voltage | 2.75V (0.2C) |
| 11 | Operating temperature | Charging: 0°C ~45°C Discharging: 0°C ~45°C |
| 12 | Storage temperature | -10°C ~ +45°C |
| 13 | Dimension | Length: 40±2mm Width: 20±0.5mm Thickness: 8±0.2mm |
| 14 | Drop Test | Dropped from 1m twice onto concrete - no fire, no leakage |
| 15 | Cycle time | ≥500 times |
Smart devices:
Suitable for devices with moderate battery life requirements such as fingerprint locks, cervical massagers, microphones, etc. The battery has a standard voltage of 3.7V and supports working in an environment of -10~60℃. The cycle life is up to 500 cycles, which can meet daily use needs.
Consumer electronics:
Can be expanded to small household appliances such as aromatherapy machines and beauty devices. Its lightweight design (10×20×40mm) and low-temperature working characteristics (-10℃ start-up) are suitable for outdoor scenes in winter.
Industrial scene:
Outstanding performance in medical equipment (such as detectors, scanning pens). The battery has high consistency and low self-discharge characteristics (monthly self-discharge rate ≤5%), and can maintain stable performance after long-term storage.
- A-grade battery cells: Use high-quality raw materials, sufficient capacity, long battery life, safe and non-explosive, non-inflating, and fully automated manufacturing.
- High-performance protection board: Stable voltage output to support current, prevents overcharging, over-discharging, and short circuit.
- International standard lead wire: High-quality wire with strong conductivity, not easy to break, supports high-probability discharge.
- Wide nickel tabs: Good thermal and electrical conductivity, reduces heat generation, ensures stable current output.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.