AVENTICS Filter Pressure Regulator Series NL4–FRE–0821300350 With Die Cast Zinc Housing
Product Description:
The AVENTICS Series NL maintenance units are a powerhouse in compressed air preparation. Versatile enough for any area, they can be used as individual parts or assembled units, whether for centralized or decentralized systems. Available in compact or powerful avatars, they withstand high and low temperatures. The Series NL offers a fully customizable technology, allowing you to mix components for specific functions. The AVENTICS Filter pressure regulator, Series NL4 – FRE – 0821300350, is a key part of this lineup. It effectively filters impurities and regulates pressure in compressed air, ensuring clean and stable air supply for your industrial applications. Trust AVENTICS for a tailored, high - performance compressed air solution.
Product furtures:
- G 1/2 G 3/4
- Filterporenweite 5 µm
- mit Manometer
DESCRIPTION:
| Parts | Filter pressure regulator |
| Condensate drain | semi-automatic, open without pressure |
| Relieving exhaust | with relieving air exhaust |
| filter porosity | 5 µm |
| Pressure gauge | with pressure gauge |
| Housing | Die cast zinc |
| Reservoir | Polycarbonate |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 6900 l/min |
| Compressed air connection | G 1/2 |
| Version | 1-part, Can be assembled into blocks |
| Parts | Filter pressure regulator |
| Mounting orientation | vertical |
| Certificates | suitable for ATEX |
| Working pressure min./max. | 1,5 … 16 bar |
| Ambient temperature min./max. | -10 … 60 °C |
| Medium temperature min./max. | -10 … 60 °C |
| Medium | Compressed air Neutral gases |
| Nominal flow Qn | 6900 l/min |
| Regulator type | Diaphragm-type pressure regulator |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | 0,5 … 10 bar |
| Pressure supply | single |
| Filter reservoir volume | 50 cm³ |
| Filter element | exchangeable |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at “Customer information”. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). |
|
| Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : – |
| Material |
|---|
| Housing | Die cast zinc |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene rubber |
| Threaded bushing | Die cast zinc |
| Reservoir | Polycarbonate Die cast zinc |
| Protective guard | Steel |
| Filter insert | Polyethylene |
Product Details:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.