Black VA Segmented LCD Display 25PIN For Dental Measuring Instruments
VA LCD (Vertical Alignment LCD)
Features:
- Liquid crystals are vertically aligned to the glass substrate when no voltage is applied, blocking light and producing deep black levels.
- When voltage is applied, the crystals tilt, allowing light to pass through.
Advantages:
- High Contrast Ratio: Exceptional black levels and vibrant colors.
- Wide Viewing Angles: Better than TN but slightly narrower than IPS.
- Good Color Accuracy: Makes it suitable for multimedia applications.
- Energy Efficient: Consumes less power compared to other LCD types in static images.
Disadvantages:
- Slower Response Times: Motion blur can occur in fast-moving visuals.
- Higher Cost: More expensive than TN LCDs.
Detailed Parameters:
| Model number | GY06805NM-11 | LCD type | Segmented Display |
| Outline Dimension | 99.5(W)* 67.7(H)* 2.8(T) mm | Display mode | VA, Negative |
| LCD viewing area | 95.5(W)* 59.0(H) mm | Polarizer type | Transmissive |
| Drive method | 1/4 Duty, 1/3 Bias | Working voltage | 5.0V |
| Viewing angle | 12 O'clock | Connection Way | PIN, 25 numbers |
| Operate temperature | -20℃~+70℃ | LED Backlight | White |
VA LCD vs. STN LCD vs. TN LCD:
| Features | VA LCD | STN LCD | TN LCD |
|---|---|---|---|
| Contrast Ratio | High | Moderate | Low |
| Viewing Angles | Moderate to Wide | Moderate | Narrow |
| Response Times | Moderate | Slow | Fast |
| Color Accuracy | Good | Poor to Moderate | Poor |
| Power Efficiency | High | Very High | High |
| Durability | High | Moderate to High | High |
| Cost | Moderate | Low | Very Low |
| Applications | TVs, monitors, medical, automotive | Industrial, basic devices | Gaming, budget monitors |
1. Q: What products can you provide?
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: What is the process for custom samples?
A: Send inquiry -- Offer quotation -- Confirm quotation & Pay tooling charge -- Provide drawing -- Confirm drawing -- Make tooling & samples -- Samples finished -- Delivery via freight or sea collect.
3. Q: How long can I get the custom samples?
A: Different product types will take different times. Usually, it will take about 30-35 days.
4. Q: Can I get free samples?
A: We would like to provide 3-5 pcs free samples after tooling.
5. Q: What is the minimum order quantity?
A: MOQ mainly depends on LCD sizes.
6. Q: How long is it for mass production?
A: Usually 35-45 days, it depends on your part number.
7. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.